新手上路
三星級會員
- 舊站積分
- 277
- 舊站發表文章數
- 692
|
發表於 2014-5-13 22:54:50
|
顯示全部樓層
Re: Re: Re: Re: Re: 歐美好聲的av前級
原發表者是 lolo258
[B]
呵呵,彼此彼此,在下正是用Lexicon MC8純類比的LKK,如果老兄只想用Lexicon的類比,那麼請務必注意,MC8和更高階的MC12在類比部份是完全一樣的,MC12的強項在於解碼器,並且MC8能設定兩組多聲道輸入,不但價格比較便宜,用途也更廣泛些。
根據在下的瞭解,Krell和Lexicon的老前級在純類比部份的比較如下:Krell HTS7.1 > Lexicon MC12 = MC8 > Krell Showcase7.1 [/B]
不知網兄關於 MC8 跟 MC12 的比較是根據何而來的 我剛開始也信以為真 但是查了一下 官方公佈數據 這兩者的 main audio zone specification 有極大不同 這老美的公佈數據如果非真 應該可以靠官司來取的大筆賠款 網兄如有成功 請分紅一些給 MYAV網友們 如跟錄音工作人員一起告訴的話 理賠會更多
Lexicon MC8 & MC12 audio 主要差別在於
THD + noise
Dynamic range
SN noise
and etc.
爾兩者不指數位LAYOUT不同
在電源 跟 LAYOUT 也不同
mc12
Audio Input & Output ConnectorsHD + Noise Dynamic Range Signal-to-Noise Ratio Input Sensitivity
‧ Below 0.003% at 1kHz, maximum output level
Main Zone Audio Outputs
‧ 12 unbalanced (RCA) and 12 balanced (XLR, MC-12 Balanced only) connectors for Front L/R, Center, LFE, Subwoofer L/R, Side L/R, Rear L/R, and Auxiliary L/R
‧ 300mVrms typical, 12Vrms maximum (XLR connectors, MC-12 Balanced only)
Zone 2 Audio Outputs
‧ 2 unbalanced (RCA, 1 fixed and 1 variable output level) stereo connectors and 1 balanced stereo connector (XLR, variable output level, MC-12 Balanced only)
Record Zone Audio Outputs
‧ 2 unbalanced (RCA, 1 fixed and 1 variable output level) stereo connectors
Main Zone Audio Performance
D/A Conversion Frequency Response
‧ 24-bit, 44.1 to 192kHz, multi-bit ∆Σ architecture
‧ 10Hz to 20kHz, +0.1dB/-0.25dB, -0.75dB at 40kHz,
A/D Conversion D/A Conversion
‧ 24-bit, 96kHz, dual-bit ∆Σ architecture
‧ 24-bit, 44.1 to 192kHz, multi-bit ∆Σ architecture,
reference 1kHz
‧ Below 0.005% at 1kHz, maximum output level
‧ 105dB minimum, 108dB typical, 22kHz bandwidth
Frequency Response
‧ 10Hz to 20kHz, +0.1dB/-0.25dB, -0.75dB at 40kHz, reference 1kHz
A-2
‧ 6 S/PDIF coaxial (RCA), 6 S/PDIF optical (5 TosLink and 1 optical mini jack), and 1 AES/EBU (XLR) connectors
‧ 108dB minimum, 111dB typical, 22kHz bandwidth
‧ Coaxial and optical input connectors conform to IEC- 958, S/PDIF standards
‧ 200mVrms (2Vrms for maximum output level) at 0dB input gain
‧ Accepts 44.1, 48, 88.2, and 96kHz sample rates
‧ Accepts16-24bitsPCMaudio,DolbyDigital,dts,and dts-ES discrete data formats
Input Impedance Output Level
‧ 100kΩ in parallel with 150pF
‧ 150mVrms typical, 6Vrms maximum (RCA connectors)
‧ 1 S/PDIF coaxial (RCA) and 1 S/PDIF optical (TosLink) connector (in parallel)
Zone 2 & Record Zone Audio Performance
operating in dual-mono mode
THD + Noise Dynamic Range
Specifications are subject to change without notice.
Output Impedance
‧ 100Ω in parallel with 150pF (RCA connectors)
‧ 50Ω in parallel with 150pF (XLR connectors, MC-12
A/D Conversion
‧ 24-bit, 44.1 to 96kHz, dual-bit ∆Σ architecture (Record Zone only)
‧ 108dB minimum, 111dB typical, 22kHz bandwidth
‧ Maximumvaluewithfull-scaleinputsignalandvolume at +12dB
Balanced only) |
|