新手上路
一星級會員
- 舊站積分
- 35
- 舊站發表文章數
- 53
|
發表於 2005-5-13 16:47:56
|
顯示全部樓層
Re: Re: Re: 請問貼軟木皮的Edinburgh是那年生產的?
原發表者是 madog
[B]
謝謝 McIntosh 大大的解說,但經過小弟之一番查證,謎底揭曉是在其鍍K金的銘板上有Hard Wired Crossover Network之字樣(請問這是甚麼意思?),[/B]
從網路中發現一篇很好的文章,名為 A Brief Tannoy Product History,對於Tannoy之各種產品之演進做了一個頗為詳盡之解說,因此亦對甚麼是"Hard Wiring "也有所解釋,小弟認為可能可以將之翻譯為「固定線路」。然而因為小弟本身並非學電的,同時英文也只是馬馬虎虎而已,因此乃不揣陋簡將之翻譯如下,並將原文附上,若有未盡之處,尚望各位先進不吝賜教:
「從1985年起,在分音器設計中Tannoy放棄了印刷線路板及晶片開關. 經過充分研究後之結論顯示配線規劃及機械設計或高電流喇叭之分音器是極具重要性的。因此極為精準的試聽實驗開始進行以試圖分離出所遭遇的聽覺影響。最後,Tannoy之研發部門做了以下的結論:
印刷線路板對於聲音的品質是有不良的影響。接地是非常重要的。元件必須固定牢靠以防止麥克風效應。擦拭連結點及開關會顯著降低聲音的品質。因此對於電路之連結點予以鍍金之處理是有助於聲音品質的改善。同時,連結的訊號線的品質也有顯著的聽覺差異。
因此在1985年,Tannoy就開始引進Super Gold Monitor系列及名為FSM之高階的監聽喇叭,以取代Super Red 系列。同時亦開始在其他產品上逐漸揚棄安裝於元件上的印刷線路,而改用」Hard Wiring」,並採用用鍍金鏍絲之端子之」High Current Switches」,這些改善措施均獲得多項世界性的專利。」
"From 1985 Tannoy abandoned printed circuit boards and wafer switches in the crossover designs. A significant amount of research had shown conclusively that the layout and mechanical design or a high power speaker crossover was vital. Listening tests were carried out with great precision to isolate some of the aural effects encountered. The Tannoy R & D department concluded that:
Printed Circuit Boards are detrimental to sound quality. Star earthing is of paramount importance. Components must be held down securely to prevent microphonics. Wiping contacts and switches downgrade sound quality significantly. Gold plating of electrical contacts is beneficial to sound quality. Connecting cables can have audible effects.
In 1985 the introduction of the Super Gold Monitor series and a top end monitor called the FSM commenced, replacing the Super Red series. Simultaneously a gradual change over in other products to 'Hard Wiring', eliminating printed circuit mounted components and, 'High Current Switches' using gold plated screw terminals, for which many worldwide patents were granted, was undertaken."
Excerpted from http://www.hilberink.nl/codehans/tannoy52.htm |
|