忘記密碼
 立即註冊
樓主: Ken Wu

Room EQ Wizard 空間分析軟體簡介

[複製鏈接]

73

主題

3758

回帖

0

積分

新手上路

毒販

舊站積分
1283
舊站發表文章數
3073
發表於 2010-5-6 22:51:37 | 顯示全部樓層
原發表者是 leon88
[B]


r88522726 大,REW是用來檢視空間的分析軟體

並不是用來檢視喇叭等級

應該跟喇叭廠,混不混沒有關係吧[] [/B]


謝謝糾正,是我表達不清楚,我知道REW是測空間的。
因為很多這類軟體都太著重於頻率響應這些,對於相位不聞不問,一味的用廉價EQ調出平坦的響應曲線,卻忽略了相位偏差,實在不可取。
[size=4][color=red]一見真平幕,終身不回頭![/color] [URL=http://www.isf.com.tw]請點我-真平布幕專賣店-Grandview布幕台灣總代理[/URL] [URL=http://tinyurl.com/kg74hbd]請點我-真平布幕粉絲團[/URL][/size]

145

主題

2629

回帖

0

積分

新手上路

四星級會員

舊站積分
793
舊站發表文章數
2157
發表於 2010-5-7 23:13:16 | 顯示全部樓層
新版的REW,對於EQ自動等化的功能,又更進一步了

真是超華麗的顯示畫面,這真的是不用錢的嗎[:O]

你能自由選擇LPF HPF的分割頻率

相較於上版的參考性調整

這版採全面自動調整,不光只是降音壓,還有部分的拉

當然這與市面上面自動調整的機器,最大的不同是

要不要這樣調,還是看你自己





以上畫面全是自動調整,還增加幾台新的EQ裝置


連調整後的殘響瀑布圖,都模擬出來

是否在暗示市面上部分,宣稱能修改時域特性的EQ機器

其實都大同小異
[URL=http://www.myav.com.tw/bbs/showthread.php?s=&threadid=421175&perpage=12&pagenumber=1]時光鏡[/URL]

1

主題

121

回帖

0

積分

新手上路

二星級會員

舊站積分
278
舊站發表文章數
117
發表於 2010-5-16 21:23:23 | 顯示全部樓層
好文章,感謝分享。

145

主題

2629

回帖

0

積分

新手上路

四星級會員

舊站積分
793
舊站發表文章數
2157
發表於 2010-6-13 11:17:07 | 顯示全部樓層
V5 Beta 板一直不斷持續更新

使用的網友也記得要去回報使用狀況歐



The V5 Beta release downloads are attached. Note that this is a Beta release, please report any issues or make any comments in the V5 Beta thread in the REW forum

Read more: REW V5 Beta Downloads - Pro Audio Forums - ProAudioShack.com


更新內容


5.5.2010:
Update soundcard settings sweep level when changed from measurement dialog
Don't mark data as needing to be saved when generating waterfalls, decay or spectrograms
Fixed incorrect "data not saved" warnings on exit or deleting measurements and changed warning text
Stopped waterfall graphs drawing outside bounds
Made provision for MODAL filter type in routines that send filters to TMREQ, BFD, FBQ
IR Windows frame was not closed if all measurements had been deleted
Measurement panel help was not updated
Measurement description could be set to blank
Use a common color chooser for all color selection buttons
Waterfall apply Defaults button did not restore perspective selection settings properly
Fixed possible bug in programmatic equaliser selection
Cal max increased to 180dB(!)
Abbreviated text for Parametric EQ filter in filter panel filter type selector could be incorrect sometimes
File dialog preview would crash if a measurement file had more than 9 measurements

16.5.2010
Recalculate ETC when IR zero time is changed or IR is converted to min phase
Made phase unwrapping insensitive to measurement delays
Inhibit log spaced conversion of measurements if IR peak significantly offset from zero
Made the REW ComboBox UI the default for all combo boxes
Removed "eak Index" from the measurement info and added the time at which the peak occurs
Tweaked phase unwrap thresholds for zeroes
When showing deltas on zoom box show all time deltas with equivalent distances and if the graph has a second Y axis show y deltas for both axes
Better cleanup when measurements are removed
Shifted lighting position for spectrogram 3D enhancement to come from left rather than top left
Show confirmation dialog if about to overwrite an existing file
Updated impulse response help
Show measurement number alongside measurement name in overlay legend
Show the smoothing octave fraction in the trace legend for traces that have smoothing applied
Removed the smoothing control from the measurement panel
Added smoothing controls in the SPL & Phase and Group Delay graphs and in the filter adjust graph in the EQ window
Added controls to apply smoothing to all selected traces in the SPL, phase, Predicted SPL, Predicted phase, Group Delay and Averaged overlay graphs
Made trace selection common across all overlay graphs
Phase and Predicted Phase Overlay plot wrap/unwrap controls only apply to selected traces
Moved the trace offset adjustments into the SPL overlay graph controls
Removed the "Show More"/"Show Less" button on the measurement panel, no longer needed
Measurement colour changes before waterfall was generated were not picked up by the waterfall when generated
Measurement number on thumbnail was not updated when measurements were deleted
Changing the colour of a measurement did not change the colour of the EQ panel Predicted traces
On step response overlays responses did not appear when selected until the cursor moved away from the trace name
Info panel was only updating when measurement selection changed, was not showing changes as they were applied to the current measurement
Could get exception when previewing V3.29 or earlier mdat files
Added a flag in Comms Settings to enable Midi comms, disabled by default under OS X as some Macs crash on Midi access
Stopped Generate button being drawn too narrow for its label
Fixed filter upload to unit for TMREQ
Fixed a bug that could cause color chooser to stop working after deleting measurements
Fixed a drawing artefact at the edges of the 3D enhanced spectrogram
Stopped all overlay traces being selected when phase wrapped/unwrapped
Impulse graph in EQ window did not update when changing state of settings on main impulse graph

30.5.2010

Tweaked smoothing indicators to display better under OS X
Added Plus 360 and Minus 360 buttons to the overlay phase controls
Plus 360 and minus 360 phase buttons no longer shift wrapped phase
Modified phase unwrap to put unwrapped phase within -180...180 in the middle of the measurement range
Added analysis setting to specify default smoothing to apply to new measurements
Allowed either channel to act as timing reference
Swapped Measure and Open toolbar buttons
Modified smoothing shortcuts to toggle smoothing on/off if already smoothed to the chosen octave fraction to get around Vista and Win 7 use of the ctrl+shift+0 clear smoothing shortcut
Modified filename legal characters to allow umlauts and accented characters
Added min and excess phase and group delay traces and min phase impulse trace, changed "Convert to min phase" to "Generate min phase"
Added right-click menu to overlay window legend panel to select all/clear selections
Improved display of full spread of data values in graphs
Added "Show data points" controls to SPL&hase and GD plots and to Measured, Phase and GD Overlay plots.
Changed soundcard calibration button title to "Calibrate..."
Added automatic check for newer version on startup, with entries in Help menu enable/disable startup check and to check manually
Allow target level up to 120dB (limit was 100dB)
Removed the loopback level check at the start of measurements when using other channel as timing ref (level is checked at end)
Changed default frequency for sine wave generator to 1kHz
Audio generation modifications to eliminate glitches at the beginning of sweeps on OS X or if using Java Sound Audio Engine (which is NOT recommended)
Legend values go blank when cursor is outside the range of the measurement
Set system property apple.awt.graphics.UseQuartz false to prevent startup crash on OS X Tiger
Changed handling of unwrapped phase data to correct problems with 96PPO data
Adjusting IR zero time or applying IR windows would cause phase to become wrapped
Scope plot was broken
Last sample of average plot could be invalid
Spectrogram image was not shown after using "Apply Default Settings"
X axis zoom out did not operate if cursor was on one side of graph and scroll bar was at opposite side
Prevented REW sometimes being muted on startup
Fixed plotting bug for Schroeder Integral trace at high zoom
Tidied up graph plot routines
"Use bars on spectrum" did not immediately update the trace
Fixed frequency axis scaling bug when using linear frequency axis for data converted to 96PPO
GD trace was affected by trace SPL offset
Using Invert Impulse on soundcard measurements was shifting response to 75dB
Phase values were sometimes not wrapped properly
Waterfall overlay selector now correctly updated if measurement name changed
Filter download to FBQ2496 was broken
Y axis selector closed itself on Mac before allowing selection
Clear the spectrogram if the impulse zero time is changed
Scope plot axis extents setting did not work
Y axis selector text was truncated under OS X




[/COLOR]

34

主題

60

回帖

0

積分

新手上路

初級會員

舊站積分
0
舊站發表文章數
12
發表於 2011-1-1 23:59:54 | 顯示全部樓層
這幾天再研究room eq wizard如何使用
卻一直卡在無法選取Control Output來調整
是因為我用主機板內建音效的原因嗎?
跟朋友借了x-fi xm後能選取Control Output卻無法改變Wave Volume .....
請問這是音效卡相容性問題嗎?還是我設定問題 應該音效卡大部分都能使用
煩請有經驗的大大能請教一下...系統應該沒差吧 我是win7
還是有住台南大大有玩過的 能讓我請教一下如何使用......=.=||

226

主題

6231

回帖

100

積分

新手上路

五星級會員

舊站積分
3604
舊站發表文章數
5787
 樓主| 發表於 2011-1-2 12:39:03 | 顯示全部樓層
原發表者是 kvaren
[B]這幾天再研究room eq wizard如何使用
卻一直卡在無法選取Control Output來調整
是因為我用主機板內建音效的原因嗎?
跟朋友借了x-fi xm後能選取Control Output卻無法改變Wave Volume .....
請問這是音效卡相容性問題嗎?還是我設定問題 應該音效卡大部分都能使用
煩請有經驗的大大能請教一下...系統應該沒差吧 我是win7
還是有住台南大大有玩過的 能讓我請教一下如何使用......=.=|| [/B]

歡迎使用Room EQ Wizard!

查了一下, 在REW forum 有人也用x-fi 在v5 beta 版本出現過音量調整問題(見此串), 後來應該經修正bug後解決了.
偶爾會出現音效卡與REW間的相容問題, 有人建議如避免麻煩, 儘量採用人家用過, 沒出現奇怪相容問題的外接音效卡.


REW v5 beta 下載頁

REW v5 beta feedback page

附帶一提,這兩天與一些熱心的朋友簡單測了mic(Earthworks M23, ECM8000) 與音壓計的差距,
發現1khz 以下的基本測量, 測到的(兩支)便宜的ecm8000都蠻準的(誤差小於1~2dB),
再高的話就差了. 而音壓計在midbass (約40~50)以下就開始偏, 觀察到可達誤差5dB之多.
因此小弟會建議,以調整低頻用途而言, 如果要求精度高些, 還是使用mic 前級+ mic 測量吧.

71

主題

518

回帖

0

積分

新手上路

二星級會員

舊站積分
244
舊站發表文章數
232
發表於 2011-6-30 09:58:27 | 顯示全部樓層
請問現階段要用哪款外接USB音效盒比較OK呢?
Creative Xmod好像買不太到了,價位2000多
這個有支援WIN7嗎?

Creative X-Fi Go Pro是USB音效棒,感覺不太保險

Creative Digital Music Premium HD~這款比較新的樣子
不過價位要3000多

前輩們有什麼建議嗎?

226

主題

6231

回帖

100

積分

新手上路

五星級會員

舊站積分
3604
舊站發表文章數
5787
 樓主| 發表於 2011-6-30 10:36:17 | 顯示全部樓層
原發表者是 haskey
[B]請問現階段要用哪款外接USB音效盒比較OK呢?
Creative Xmod好像買不太到了,價位2000多
這個有支援WIN7嗎?

Creative X-Fi Go Pro是USB音效棒,感覺不太保險

Creative Digital Music Premium HD~這款比較新的樣子
不過價位要3000多

前輩們有什麼建議嗎? [/B]


弟在win7上用creative xmod 沒發現問題. 記得要找全雙工的就好, 如可能借用, 會更保險.
音效卡如果主要用在REW上, 建議不要花大錢. 是我的話,寧願將預算多分配在買mic+mic前級上.
最近比較音壓計與mic+mic pre 的測量數據, 發現還是有相當差異的.
有些音壓計在極低頻(40Hz以下)就有相當的偏差. 弟最近從國外進了隻 galaxy CM140 (MIT []) 頂多也只在20Hz以上較有可信度, 只是其輸出增益還是一樣不太夠..

1

主題

121

回帖

0

積分

新手上路

二星級會員

舊站積分
278
舊站發表文章數
117
發表於 2011-6-30 10:54:43 | 顯示全部樓層
這台USB外接音效盒精準度相當不錯,只是費用高了點。如果能再加個音壓校正器,測量出來的數值可信度相當高。




62

主題

2361

回帖

0

積分

新手上路

四星級會員

舊站積分
742
舊站發表文章數
2367
發表於 2011-6-30 11:01:12 | 顯示全部樓層
RME Fireface UC 是不錯的usb介面聲卡.
您需要登錄後才可以回帖 登錄 | 立即註冊

本版積分規則

Archiver|MyAV視聽商情網 test

GMT+8, 2026-11-19 13:24 , Processed in 0.186049 second(s), 41 queries .

Powered by MyAV!

快速回覆 返回頂部 返回列表