新手上路
五星級會員
- 舊站積分
- 952
- 舊站發表文章數
- 6120
|
發表於 2006-11-17 11:47:02
|
顯示全部樓層
Meridian DSP8000 Digital Active Loudspeaker
Performance: Frequency response in-room within 3dB from 20Hz to over 20kHz. Maximum output >118dB spl @ 1m on music material Noise less than 15dB spl. Overall distortion typically <0.02% at any frequency or level
Inputs: Two digital inputs to SPDIF standard; 32kHz?6kHz sampling rates at up to 24 bit; MHR support. (A future software update will enable support for 192kHz.)
Construction: Two separate enclosures: mid/top and bass. Four-way infinite-baffle system. Digital crossovers at 80Hz, 200Hz and 2.6kHz. Horizontally opposed and profiled bass system introduces minimal vibration to the mid-top enclosure. 6 x 200mm long-throw bass drivers. 1 x 160mm polypropylene mid driver in separate enclosure 1 x 25mm aluminium-dome tweeter, silver wire, short horn-loaded with protective grille. Black gloss piano-lacquer head and glass front bass cabinet Other colours to special order. FIFO memory buffer input for the lowest possible jitter from almost any source. Analogue gain and filtering using proprietary Meridian Class-A discrete amplification. Digital and conversion electronics constructed using advanced surface-mount techniques and partitioned 6-layer printed-circuit boards. Four 24-bit 128x oversampling D/A converters. Five 100W power amplifiers per speaker. All processing is performed upsampled in twin 100MHz digital signal processors (DSPs).
Dimensions: 1350mm (53.2in) H, 400 (15.7) W, 528 (20.8) D. Weight 105kg (231lb) each
Controls: Rear-panel controls for Power On/Off. MSR and RS232 port provide control over bass, treble tilt, listening axis, volume, time-compensated balance and absolute phase.
Front display: Eight-character display with system lights, can be blank. |
|