新手上路
二星級會員
- 舊站積分
- 42
- 舊站發表文章數
- 216
|
發表於 2009-3-5 13:57:39
|
顯示全部樓層
原發表者是 steffen
[B]關於BPS-2電池供應說明小地找到發燒天書評論,使用方法節錄如下
看的有點吃力,好像是BPS-2有電力就由其供應,電力沒了就自動轉到
AC供電,BPS-2電源燈號就熄了......不知對嗎?那電力充飽了會不會又
自動轉為電池供電啊???
Ergonomically, the Model 2/BPS-2 combination was a dream to operate, with no operational glitches. Pressing a button on the BPS-2's front panel toggles between AC and battery (DC) supply, with a small light indicating whether the BPS-2 has been sufficiently charged. If the BPS-2 isn't ready, then pressing the button has no effect, the Model 2 continuing to operate from AC. The changeover from AC to DC power was accomplished without switching noise or any interruption of the sound.
When connected to a fully charged BPS-2, the Model 2 will operate for several hours without being connected to AC (playing music at moderate level, I got over four hours before the red warning light came on), although Rowland recommends that it be left plugged in. This was the way I used it most of the time. (But see below.) [/B]
電池充飽了需按下BPS2面板按鈕,燈亮表示電池充飽了可以供電!
原廠建議插頭一直插著,讓電池保持電量充足狀態,但是插頭插著是否還是以電池供電?發燒天書好像也有疑慮!
不過,小弟手上的前級使用說明提到即使AC插頭插著,還是由內部電池供應!雖然前,後級可能不同,但是應會用相同理念來設計.
您有沒有比較AC供應與否在聲音上有差嗎? |
|