忘記密碼
 立即註冊
樓主: chucky7

美國網路直售喇叭和超低音的經營生態和使用觀點

[複製鏈接]

226

主題

6231

回帖

100

積分

新手上路

五星級會員

舊站積分
3604
舊站發表文章數
5787
發表於 2017-8-15 14:15:22 | 顯示全部樓層
原發表者是 chucky7
[B]
我會這樣子說是因為要他們衝兩粒比要他們學 REW 簡單多了... [}] 好像只要有兩粒, 隨便亂擺, 頻響會自動變平一樣. []

我看了好多例子都是把兩粒重低音當螢幕的左右護法. 在 JTR 重低音討論串裡, 您看看有貼過空間的頻響和極限輸出的一隻手都數的出來. 我知道至少有5個有衝兩粒的. 一個雙 Cap 118HT 和 一個雙 Cap 1400 的重低音擺專屬視聽室布幕下方. 一個雙 Cap 1400 的勸他用 REW 勸不動, 但至少他是一前一後. 那個雙 Cap S1 的 兩台擺一起. 還有1個雙 Cap 2400ULF的就是當電視的左右護法... 根本沒看他們貼過空間的頻響, 大多是靠耳朵聽聽就算了.  

我入手 Cap 1400 都超過兩年了, 我還在一直玩一直玩呢... [] [/B]


Jeff (JTR 老闆)就提過有一位好友是專業車手,他說男人啊..對那些新拿到跑車的人提醒上路前要注意那些事項,如何駕馭怪物發揮性能,到頭來發現他們都只想開出去風騷啦..

34

主題

1311

回帖

0

積分

新手上路

Da Man

舊站積分
1718
舊站發表文章數
1326
 樓主| 發表於 2017-8-15 14:20:25 | 顯示全部樓層
原發表者是 Ken Wu
[B]這個我昨天也看到了,還蠻驚訝..因為 Mark Seaton的說法跟其他網友的使用經驗上,這顆的擴大機吃電比較上算省,保險絲 跳電的 機率還算蠻低的
這位網友在解釋的過程中提到,電工到他家看過建議他要拉專線,可是他不想這麼作,既然換了就看看他後續如果還是搞兩顆的話,會不會也同樣發生這樣的情形[}] [/B]

我覺得 imureh 是太習慣反射式的聲壓輸出了. 他之前的重低音是 PB-12 Ultra 吧... 我看那時 Enrico 有 post 在調校 Submersive 時, imureh 一直要大聲再大聲. 相同音量下, 密閉式產品使用的功率會比反射式大好幾倍, 所以才跳電.

我想他可能以前用舊的重低音時沒有跳過電, 所以他才認為電工在危言聳聽, 寧願把重低音退掉.

imureh 這樣一搞, JTR 和 Seaton 都不會再理他了... 我覺得他可能會試試看 Rythmik... 至少 Rythmik 是 local 可以自取省運費. 但 Rythmik 的 FV18 比 JTR Captivator 1400 體積更龐大, 而且 FV18 的 擴大機板效率也沒有 JTR/Seaton 採用的 SpeakerPower 高.

60

主題

7848

回帖

0

積分

新手上路

五星級會員

舊站積分
218
舊站發表文章數
4420
發表於 2017-8-15 16:20:35 | 顯示全部樓層
原發表者是 jimchao
[B]偏置並非單一頻響圖即可判別,跟XOVER亦非直接相關。

不明白網兄貼出的頻響圖如何讓您發現偏置原因?

[/B]


我的AR視聽室[URL]http://www.myav.com.tw/bbs/showthread.php?s=&threadid=100098[/URL]

43

主題

1298

回帖

0

積分

新手上路

四星級會員

舊站積分
1114
舊站發表文章數
1004
發表於 2017-8-15 17:08:02 | 顯示全部樓層
你這是??? 要誰觀落陰?

偏置? 用這張圖可以解釋??? 請開釋!


原發表者是 kenhugh
[B]

[/B]
-數據才是調整的開始-

95

主題

674

回帖

0

積分

新手上路

二星級會員

舊站積分
72
舊站發表文章數
244
發表於 2017-8-16 00:11:55 | 顯示全部樓層
原發表者是 kenhugh
[B]

說明已在圖中....
[/B]


看不出來那邊說明到了
也看不出來解決方法為何
可能是我沒慧根吧…

34

主題

1311

回帖

0

積分

新手上路

Da Man

舊站積分
1718
舊站發表文章數
1326
 樓主| 發表於 2017-8-16 00:31:44 | 顯示全部樓層
原發表者是 kenhugh
[B]

[/B]

那麼請問下面這顆偏哪邊?



[]

60

主題

7848

回帖

0

積分

新手上路

五星級會員

舊站積分
218
舊站發表文章數
4420
發表於 2017-8-16 08:33:12 | 顯示全部樓層
原發表者是 chucky7
[B]
那麼請問下面這顆偏哪邊?



[] [/B]


[] 如果是xover後輸出長這樣子 放那就轟那[)]

34

主題

1311

回帖

0

積分

新手上路

Da Man

舊站積分
1718
舊站發表文章數
1326
 樓主| 發表於 2017-8-16 14:41:14 | 顯示全部樓層
剛剛找到一些有關推挽設計重低音的資料:

Push Pull Basic Theory

"Two drivers share an acoustic volume of air within a single enclosure. The best way to take advantage of this alignment is to mount one driver facing outwards with the other driver inverted and facing inwards. The drivers are then wired so that they are electrically out of phase while remaining mechanically still in phase with one another.

Odd ordered harmonics are cancelled out by using this approach according to Vance Dickason. According to M&K who specialize is push/pull subwoofers claim that this approach cancels out even ordered harmonics. So take your pick. Either way, harmonic distortion is reduced in that any anomalies or variations in the two driver's spider, cone or suspension characteristics are canceled out by the other driver's inversely proportional anomalies and variations.

The sound is as accurate and pure as it can possibly be with each driver "correcting" the other driver. Of course many times two drivers will share the same acoustic volume of air while maintaining the more traditional look of having both drivers fire forward into the listening environment. Though this does not have the same harmonic cancellation effect, all other characteristics between the two alignments is identical. Box volume must be twice that of a single driver. This can be easily modeled by taking the Vas of a single driver and multiplying it by two. The system has an increased efficiency of 6dB over a single driver. Power handling for the system is twice that of single driver. Frequency response is the same for a single driver in an enclosure excaly half the size.

Advantages

Increased output and power handling. Very high SPL capability.

Disadvantages

One single huge speaker enclosure that may be both unattractive and hard to move. Response it essentially identical to building two smaller enclosures of exactly half the size but without the versatility of placement of two separate subs. If one of the drivers blows due to too much power, the whole speaker will no longer perform because the blown driver will begin to act like a passive radiator. If your enclosure is already ported, then this will only cause more problems. If it is sealed, then bass response will be reduced dramatically. There are no real disadvantages to building this kind of enclosure as the speakers will behave just as they would in enclosures by themselves. It's very common to make MMT style speakers and use the two drivers in the same enclosure.

Best Applications

Where one sub just isn't enough. High power high output applications. If you choose to do the push/pull configuration, the sonic advantage may make this sub more suitable for audiophile music and critical listening experiences..."

The push-pull design is intended to reduce harmonic distortion created by the drivers themselves, and if your using incredibly low distortion high quality drivers anyway, with a design that doesn't push them that hard, then the difficulties in constructing push pull may be unnecessary.

所以功率需求是2顆單體的量, 但最大輸出只比一顆單體多了 3 分貝, 頻率響應等於是一顆單體放在體積一半的箱體內. 基本上, 輸出等於兩顆密閉式, 但是用 3分貝去換低失真.

43

主題

1298

回帖

0

積分

新手上路

四星級會員

舊站積分
1114
舊站發表文章數
1004
發表於 2017-8-16 15:02:44 | 顯示全部樓層
小弟微小知識僅知頻譜的FQ只能觀察到頻域的量能,您對chucky7兄的超低音頻率響應圖能有這番解釋,真的您有弄清楚嗎? 每顆超低音都有頻率響應,那不就每顆超低音擺哪就轟哪? 偏置來自於何處?  


[] 如果是xover後輸出長這樣子 放那就轟那[)] [/B][/QUOTE]
-數據才是調整的開始-

34

主題

1311

回帖

0

積分

新手上路

Da Man

舊站積分
1718
舊站發表文章數
1326
 樓主| 發表於 2017-8-19 04:50:09 | 顯示全部樓層
舊產品, 新造型:

JTR Captivator 4000ULF 寬版:







擴大機板可以安裝在箱體的左邊或是右邊, 這樣就可以把它整個靠牆擺.
您需要登錄後才可以回帖 登錄 | 立即註冊

本版積分規則

Archiver|MyAV視聽商情網 test

GMT+8, 2026-11-19 07:21 , Processed in 0.108608 second(s), 41 queries .

Powered by MyAV!

快速回覆 返回頂部 返回列表