新手上路
三星級會員
- 舊站積分
- 14
- 舊站發表文章數
- 668
|
發表於 2006-3-29 12:15:39
|
顯示全部樓層
我的HDTV播放機改裝報告
除了字幕; external USB HD Access; or network access 等 issues 可能必需咬要靠 firmware upgrade 外; 小弟也循著先進們的經驗和建議, 做了些 DIY 改裝 如下: 整體機器穩定性有明顯改善; 但讀片挑片的當機還是會偶爾發生 ---> I noticed the big improvemnet once replacing the original cheaper DVD-rom to Pioneer DVD-RW
[/COLOR]
A) 電源端消 noise
B) upgrade switching power supply 電容 (from 68uF/400V to 300uF/450V --三顆100uF並聯)
C) 換ATA100 cable
D) Heatsink Fan
E) Power spliter for heatsink Fan
F) DVD loader 已換成 Pioneer DVR-A08XLA and 升級到
Firmware 1.20B for region free.[/COLOR]
DVD loader 已換成 Pioneer DVR-A08XLA and 升級到
Firmware 1.20B for region free.----> this is the most difficult part because the Pioneer DVR-A08 has the slightly different form factor than the orginal lite-on DVD so the DVR loader cannot be eject properly. it took me several hours and lots of effort to make it fit in the machine box. The HDTV player became very stable and robust than ever once upgrading its cheap DVD drive to DVD-RW. On the other hand, the picture quality doesn't improve that much as least it's not noticable to me[/COLOR]
整體DIY改裝花費約$3000 NTD, 但非常值的; 多謝 Lawrence大大所提供的改裝info
 |
|