新手上路
燒膠級會員
- 舊站積分
- 9685
- 舊站發表文章數
- 21982
|
樓主 |
發表於 2007-7-12 08:44:42
|
顯示全部樓層
Trackability Test Record
它是用300 hz左右的音軌,,
來測試 tonearm-cartridge 組合的 tracking abilities

Clearaudio cut a 315 Hz signal and increase the amplitude in steps of 10u (1u = 0.001mm) from 50u to 100u, The higher the value, the better your tonearm-cartridge combination should be able to track even heavily modulated grooves without audible distortion.
Please make sure that your turntable is perfectly leveled, the azimuth and vertical tracking angle are properly set .
Start this tracking ability test by using the minimum recommended tracking force (antiskating set accordingly) and gradually increase both values until your cartridge is tracking 80u in both channels.
If there is more distortion in one channel than in the other, please vary the antiskating force until both channels sound equally clean. Once the test signal begins to distort in both channels, the tonearm and cartridge are no longer able to track the groove correctly.
It is a very good result if a cartridge tracks 80u without distortion. |
|