新手上路
四星級會員
- 舊站積分
- 4156
- 舊站發表文章數
- 1844
|
發表於 2006-7-24 14:18:30
|
顯示全部樓層
企鵝兄,
謝謝您您的回覆! 哇! 您已經發表 5000篇了. 恭禧!
其時弟在會場看 LCD 陣營 Sony HS-60 表現與 Sony VW-100 差距有限. 看來是調整的因素.
1080 i 至1080 p 的轉換看來與內建晶片與線路設計有較大的關係.
以下從 http://www.hqv.com/technology/in ... A3-B25CB448454F9D0C
節錄
看來目前 HQV 是Silicon Optix 用於 CE 產品最強的中最強的 de-interlacing 技術. 不過還是要視後端的顯示器材能否完整呈現 1080 P 的魅力.
若有說錯懇請指正. 以免誤導.
Today, high-definition video displays use digital technologies, such as DLP, LCD, LCOS (including variants SXRD and D-ILA), and plasma, which dominate the television landscape. Instead of "drawing" lines of picture information on the screen, these technologies form images with an array of pixels, and each frame is displayed in its entirety all at once; in other words, all pixels are activated simultaneously to form the complete image rather than forming the image line by line as CRTs do with scanning.
Even so, the video signal that determines what these devices will display is still interlaced or progressive; that is, the information is sent from the source either half a frame or one complete frame at a time. In fact, digital displays ultimately require a progressive signal to operate properly, so if they receive an interlaced signal, it must be converted to progressive before it can be displayed.
Thus, translating the interlaced video signal from DVD and 1080i sources into progressive format is required by all digital displays. This is the job of a video processor, and the process itself is called de-interlacing. Video processors are found in all digital displays as well as many DVD players and other source devices.
If the objects in the video image are not moving, it is very easy to do the de-interlacing – the two fields can be weaved together and combined to form a complete frame. However, if the recording is performed in an interlaced manner, the two source fields that make up a complete frame are not recorded at the same time. Each frame is recorded as an odd field from one point in time, and then as an even field recorded 1/50th or 1/60th of a second later.
So, if an object in the video has moved in that fraction of a second, simply combining fields causes the errors in the image called 「combing」 or 「feathering」 artifacts.
原發表者是 企鵝
[B]雖然DLP 1080P都號稱對比不是五千,就是破萬的.
看過HT3000跟HD81後,怎麼覺得最黑都沒有DC3 720P來得黑.
據某業者說是光通道的問題,這有待確認.
當然優點都是畫面細膩度較DLP 720P增加了.靜態畫面的凝聚力也增加了.
DLP 1080p都是TI的0.95"DMD+DD3021+DC3+六倍速色輪.
但1080i → 1080P的轉換似乎都存在某些小問題.線條抖動,移動畫面較不清楚,灰階漸層模擬問題.......等等.
期待11S1能有突破性的結果.[ ] [/B] |
|