新手上路
四星級會員
- 舊站積分
- 2168
- 舊站發表文章數
- 2144
|
樓主 |
發表於 2006-9-7 23:45:33
|
顯示全部樓層
原發表者是 dcba
[B]歡兄,
五月與您在友人的婚宴上見面. 您清瘦了許多. MyAV 偶爾上上就好. 千萬不要坐在電腦前太久, 電磁波危害不可不慎.
心臟要好, 唯有每天多走點路. 讓血脈通暢. 心情自然愉快.
增強心肺功能, 游泳是好辦法, 當游泳可以換一口氣手腳游動三次以上, 每日慢游40 分 至 1 小時 800至 1500 公尺, 心肺功能自然強了. 人的意志力會變得更堅定, 更樂觀.
每週郊外山上走走吸取大自然芬多精, 赤腳在草地上走走, 洗滌身心壓力. 是調養身心健康的好方法. 走上癮, 您可能會樂此不疲喲.
祝
持盈保泰! [/B]
謝謝大哥及大家的關心!我會知所節制的.................
[續上文]
大家一定很好奇,ESOTERIC P0這部驚世之作超弩級CD轉盤,到底有何過人之處?何以日本STEREO SOUND 所有評論員自有CD史以來,曾首度一致給予三顆星滿分的讚賞,同時也讓許多歐美音響工程師都看傻了眼. 其重點在於機械結構的精密性,與突破了傳統的CD讀取方式,採用了前所未有的追蹤式移動軸承,此設計理念乃是企圖將雷射鏡穩定的進入每一個CD音坑的中心點,藉此減少讀取的偏移.所以在訊號的拾取幾乎已臻一絲不茍.鉅細靡遺的境地,聲音表現亦是集各家高級CD轉盤之優點於一身.低頻的堅實穩定.中頻的厚實清澈.高頻細緻飄逸.全頻段的紋理與解析其整體表現幾乎可以和許多高級類比唱盤一較高下.也讓我超級龜毛的耳朵無從挑剔.評論家三浦孝仁先生聽過之後,曾用」被嚇得毛骨悚然」.」若吃了白粉般難再回頭」來形容他的聽後感想,其超卓的魅力可見一斑.
ESOTERIC P0進駐後,首要目標就是得替他物色一部搭配得宜,個性吻合的美嬌娘.因為自從開始潛心投入SACD的世界後,較為高級的DAC均已脫手,身邊只留下兩部閒置的PANASONIC SV-3700 DAT,和德製的BERINGER 8024,在我後SACD時代的兩年,有時候心血來潮,會使用這兩部充當解碼器來聽部分錄音偏向冷調尖銳的片子,這部平價的DAT,以數位輸入,再以類比輸出,也是頗具實力的,不少朋友曾前來聽過他與UX-1的搭配,褒貶各半,鍾情UX-1本身當作CDPLAYER的朋友,嫌DAT密度.解析不夠,音場較為蓬鬆.而喜歡經過DAT當作DA的朋友,則稱讚其寬鬆自然,較沒有數位聲,堪與新品20萬上下的DAC一較高下,我也是給她約略此數字的超值評價,另一部BERINGER 8024,是於四.五年前(記得當時尚未開始上MyAV),和Kevin兩人各向JBL兄購買一台(JBL兄當時購入三台),如今他們均已拋售多時,只有我還留存,平日塞於書櫃底下,偶而抱出來調整頻譜,因為她是一部數位頻譜分析器.除了可測試空間曲線之外,亦可當作數位EQ,也可以作24bit 192kHz的數位解碼器.當然,這兩部聲音級數皆未能達到我的至高標準,也都不是今天的女主角,在此我就不作深入的描述與探討……..
在這一次搭配DA的過程,有幾部是以前自己曾使用過的,如WADIA 27ix.DCS ELGAR.GOLDMUND 21(現為21+)及天堯兄的最愛,自己也熟知GOLDMUND 10+(現搭配為10C&10P),另一部則是自己曾四進四出的Sonic Frontiers SFD2 MKII…...在此我要感謝出借給我這幾部DA的朋友及廠商(廠商部分我都已付了試聽費),其中有幾部欲出售的朋友,我也要對他們說聲抱歉,當時我並非存著比試的心態,只是有些部分尚未能達到我百分之一百的要求而已.所以我搭配的動作,儘量不作A.B test,而純粹是以搭配性,和整體表現為最終目的.所以!......................
前些日子,我替內湖的KUOYAO兄設計了一間音響室,這位超級發燒友和許多DIY族群的玩法及理念是一致的,他們都擁有高科技的電腦知識與技巧,在軟體方面能夠自己於電腦中轉換成DVD Audio,及透過各種程式,享受不同的播放規格及檔案處理方式的樂趣,他以電腦(另一部是MARANTZ SA8260兼容機)當作CD轉盤,透過高階的音效卡,由AES/EBU連結至DAC解碼.
在KUOYAO兄的觀念中,如果以CD軟體而言,DAC是整套音響組合,最為重要的一環.因而對於DAC解碼器的投資也較不吝惜,並且他的建議是使用專為錄音室設計的監聽DAC,取其中性及參考級的價值,這一次真感謝他讓我開足了洋葷, LAVRY GALD924的驚人表現,曾一度使我被嚇得魂不附體,也首次讓我見識到鸚鵡螺能夠發出如同四件式喇叭龐大的音場,與精采決倫的音樂表現力.今天我就從LE LAVRY BLUE及LAVRY 924這兩部DAD開始談起………
(註:最新一期音響論壇於總編重要通告裡,劉總編曾為文讚譽LAVRY DA10)
試聽過LAVRY的DAC之後,開始對她產生好奇,曾多次到網路搜尋,只可惜台灣並沒有代理商代理他家全系列的產品,因為沒有代理商,所以我們無法買到非常漂亮的售價,KUOYAO兄的LAVRY GOLD924是直接向美國以二十八萬五千郵購得來.下面簡單介紹我從網路得到的部分資訊供大家參考……..
LAVRY ENGINEERING公司,是1993年由DAN LAVRY創立於美國西雅圖, DAN LAVRY曾經參與過APOGEE DAC的設計,創業之後,致力於生產錄音室用的AD及DAC.所有LAVRY DAC的模組,都由自己公司生產,不假借他人之手,幾個DAC知名品牌,如ML.WADIA........都曾向他購買過內部模組.許多錄音室如SONY STUDIO.喬治盧卡斯的SKY WALKER. BERNIE GRUDMAN.等…….皆是採用LAVRY這個品牌作為監聽系統,錄音師們也都以後端的錄音成效重播,採用LAVRY GOLD作為試聽引為自豪.
先post LAVRY ENGINEERING老闆DAN LAVRY 的設計理念供大家參考//
http://www.lavryengineering.com/ ... inepro_r3_c1_f2.jpg
Why is there such a difference between converters based on the same IC?
The IC makers work with a very restricted and limited boundaries. They try
to fit as much as possible into a chip the size of a 「pin head」. They must
「limit the activity」 to say l watt or so of power, or else the IC will
overheat. They can not use inductors, and all the capacitors tiny (a few
pF)… IC based on say a 5V supply, is not going to accommodate say +/-15V
for good analog… no poly caps, no specialty items…
It is true that IC designers also have some advantages. Good matching and
tracking is due to the fact that all components are 「curved out of」 the
same materials and operate at the same environment of that tiny silicon
chip. But all things considered, it is a 「wonder」 how well the IC makers
do within their limitations!
Almost all AD and DA』s today are made around a ready made IC. In other
words, some designers of your gear often do not really have much
understanding of the theory behind the conversion process. Often they lack
knowledge about the difficult issue regarding circuits such as the sample
hold, resistor stability for PCM, the math behind high order noise shaping
for sigma delta… I only recently came to realize how much of the gear on
the market is the fruit of the 「glue that IC on the printed circuit board
and put it in a nice looking chassis」 mentality. While protesting the use
of 192KHz for audio, I came across EE』s that did not understand Nyquist
theorem. There are EE』s out there who don』t know that impulse response and
signal bandwidth are one and the same. There are a many more EE』s today,
but fewer than ever analog types. Not surprising in this computer age…
I am not saying that the AD or DA equipment designer has no challenges. One
can and should go beyond a simple copy the manufacturers 「typical
application」 on the data sheet. The AD front end analog circuit, DA output
stage, clocks circuits and more are the business of the gear designer, less
so of the IC maker. The good designer will not hesitate to bypass parts of
an IC, such as up sampling or down sampling filter with external hardware
driven by external coefficients. Coefficients from where? Again, you can
「buy a ready solution」 (software to generate coefficients) or even better,
do the math yourself… But you have to know math… There is a lot that can
be done to make an IC based solution work well.
The above comments apply to the LavryBlue. What about the Gold series?
Say you want to go beyond what you can find in an IC. Say you want to push
new frontiers, what is called state of the art. New concepts, system
architecture and ideas not found on an IC (some even incompatible with IC
technology) will force you to make a converter from 「basic building
blocks」. Such 「from the ground up」 approach requires years of product
development. The Lavry Gold converters are such products. They are designed
from the ground up. You start with quality resistors and go from there. The
design is not the old design with better parts. It is a better design aimed
at overcoming the limitations of the old design.
Obviously I was very familiar with PCM DA』s. I made my first audio DA while
still employed at Analog Solutions – the first segmented architecture type
DA. That design was later repackaged by Ultra Analog, and found it』s way to
Mark Levinson, Wadia, and Pacific Microsonics. Not a bad design, but PCM had
a number of flaws. So I decided to list the flaws and solve ALL of them in
my next DA.
Here are some examples:
Problem: Resistors change with temperature
Solution: Put them in an constant temperature linearly controlled oven
Problem: Resistors age
Solution: An elaborate automatic calibration scheme.
Problem: PCM performs worst at digital black (Pointed out in a paper By Dr.
Lipshitz)
Solution: Create a network with 「digital DC」 shift
Problem: DA』s are susceptible to small jitter
Solution: Processor based re clocking scheme CrystalLock (TM) provides over
200 times improvement….
Obviously, the Gold series (from the ground up) product is a difficult way
to go!
The Gold AD is great, but I made changes to allow the unit to run cooler.
The upgraded MKII+ dissipates 19 Watts (MKII was 30 Watts) and a complete AD
module repackaging job with 6 heat sinks plus air vents, and a new potting
material ( which allows heat to dissipate more evenly) is a dramatic
improvement.
The Gold DA is my favorite design.
BR
Dan Lavry
KUOYAO兄第一次抱來借我試聽的是較低價位的LAVRY BLUE(他聲稱買約五萬多元).當時,ESOTERIC UX-1還沒有賣掉,P0已翩然到來,我正在思索為P0搭配哪一部優質DA,才得以發揮P0的潛力,因為KUOYAO兄的音響室還在施工,所以他所有音響器材全部閒置在倉庫裡,他很瀟灑又很有自信的對我說:你聽聽看!不錯的話,可以留到我音響室完工才歸還…………….
LE LAVRY在台灣,鮮少有人知道,因此我花了較多時間與篇幅,讓大家瞭解深入一點,希望沒有炒作之嫌,今天先行文至此,去聽半個小時音樂,再洗澡.吃藥.睡覺啦!.........................................................Good night . |
|