忘記密碼
 立即註冊
樓主: sfgx880

盤帶式錄音機俱樂部

[複製鏈接]

26

主題

350

回帖

0

積分

新手上路

二星級會員

舊站積分
33
舊站發表文章數
150
發表於 2013-3-9 01:30:13 | 顯示全部樓層

Re: Re: Re: Re: 我的轉錄實驗

原發表者是 sfgx880
[B]

帶子也有偏壓可以調整

這個厲害

我完全不知道 [/B]



用Google找了一些資料,
我的R2R依照對應的帶子可調bias/EQ/level
找到對應406應調的參數,
而這組407跟406帶子特性非常相近,
似乎只差在塗層厚薄。

於是,剛剛又錄了一捲,
一開始效果出奇的好,大約過了十五分鐘後,
出現雜音...
中斷錄音,開始清潔磁頭與壓帶輪,
都是磁粉成塊沾黏[|)]
清好再繼續錄,聲音又正常了。

心得:不管是錄或放,棉花棒與磁頭清潔劑隨侍在側,好聲來自手勤[8D]
PREAMP: Megatech 226 POWER: Megatech SE-845 CDP: Philips CD104 LP: PIONEER PL/LINN LP12/LENCO L75 PHONO: Megatech T1/DENON DL-103 R2R: AMPEX ATR-700 SPEAKER: Tannoy Arden (HPD385)

2

主題

178

回帖

0

積分

新手上路

二星級會員

舊站積分
271
舊站發表文章數
168
發表於 2013-3-9 10:09:21 | 顯示全部樓層
原發表者是 sfgx880
[B]請問網兄們
要如何檢測帶子
要如何去除沾黏物
帶子使用真是一門學問



因為帶子沾黏的問題,
德哥把賣出去的帶子全部回收
然後退款給大家
但是


其實還是有內行的網兄堅持購買
他門說現在沒買,何時才會遇上有這種全新未拆的
還說空白錄音帶比較會發生的就是這些問題
而且AMPEX 的帶子本來就比較黏
只要觀念正確,小心檢查,謹慎使用

問題出在我們這些不太懂的人身上,

我真的不太懂,經過這幾天的瞭解

帶子最前端有個應該是受潮的試紙
有受潮是黃色的,如果是白色的就是沒問題
但是全新未拆,我又無法一一測試


只要不經過 機械結構[/COLOR] 來回run個幾次
順便檢視帶子錄音面有無完整既可


run過程中順便用面紙把錄音面用面紙跑過
把一些沾黏物除乾淨

這就是前賣家教我的

有些人比較不懂,我怕造成困擾
所以不賣的原因正是如此


------------------------------------------------------------------------------------
[B]AMPEX  5吋盤式錄音帶,全新整箱未拆,專業錄音室用的
只有5吋的
總共剩下10箱可分享給大家
一箱40片
一箱含運3500
一片才85元,這種價格此時不買等何時,
應該有20年了吧,還保存得非常好,
這種東西不可能再量產了
只要有盤式錄音機的人一定要先買起來
讓你錄到爽








[/B]

這裡有提到 Ampex vintage tape 的毛病
Early older ampex tapes are usually OK, so long as it is polyester based (and was made before about 1977). But 80s, and early 90s vintage tape is highly suspect. 456/456, 406/407, 499, at the very least, are almost always horribly sticky, and will often freeze even the strongest tranports within less than a minute of playing
http://www.audiokarma.org/forums/showthread.php?t=110050

2

主題

178

回帖

0

積分

新手上路

二星級會員

舊站積分
271
舊站發表文章數
168
發表於 2013-3-9 10:50:27 | 顯示全部樓層

Re: Re: Re: Re: Re: 我的轉錄實驗

原發表者是 Danzen
[B]
這裡的連結有提到 bias
http://www.tapeheads.net/showthread.php?t=15997 [/B]

www.audiokarma.org 底下有 tape thread, 有 tape bias 的說明如下, analog 的知識深似海, 好多要學習!!  汗!!!!
The idea of biasing the tape is this:
When you record on a tape, the bias oscillator in the deck generates a signal of around 100KHz, at 100V peak to peak, to erase the tape. This is the erase current, and it goes to the erase head. To stir up the magnetic particles on the tape, to make it easier to record on it, a smaller portion of the erase signal is fed to the record head, or the record / play head on a 2 head deck. This is the bias signal. If the bias signal is too high, it will saturate the tape, (I think it actually is self erasing the recorded signal) and you will lose highs when you record. If the bias signal is too low, the highs will be accentuated and you will get higher distortion. The method of adjusting the bias is to record a 1KHz tone and a 10KHz tone at -20dB (so you will not saturate the tape and lose highs) and adjust the bias so that they are equal on playback. You can then sweep the signal up in frequency and see where it rolls off by -3dB. For the best high frequency extension, you can adjust the record equalization so a 15KHz tone at -20dB plays back at the same level as the 1KHz tone. If your deck doesn't have adjustable record eq, and you want to get a bit more high end extension, you can adjust the bias so that the 10KHz tone is +1dB from the 1KHz tone, but no higher.
After adjusting the bias, you should adjust the internal record gain so that a 1KHz tone recorded at 0dB plays back at 0dB.
Of course, the first thing you should have done to the deck is adjust the playback level so an alignment tape with a 0dB 400 Hz tone plays back at the 0dB level for the deck, and adjust the meters for 0dB.

2

主題

178

回帖

0

積分

新手上路

二星級會員

舊站積分
271
舊站發表文章數
168
發表於 2013-3-11 10:37:20 | 顯示全部樓層
1960年代的未開封 tape, 前主人價格標籤還留著
</a><img src="http://i1132.photobucket.com/albums/m567/zangou/Scotch672A958B5C015E36.jpg" width="200" length="200" alt=" photo Scotch672A958B5C015E36.jpg"/></a>
當時的美金訂價
</a><img src="http://i1132.photobucket.com/albums/m567/zangou/ScotchNOSprice.jpg" length="200"width="200" alt=" photo ScotchNOSprice.jpg"/></a>
打開一盒, 內部很乾淨, 無霉
</a><img src="http://i1132.photobucket.com/albums/m567/zangou/ScotchNOS516789C0.jpg" length="200"width="200" alt=" photo ScotchNOS516789C0.jpg"/></a>

2

主題

178

回帖

0

積分

新手上路

二星級會員

舊站積分
271
舊站發表文章數
168
發表於 2013-3-11 10:46:29 | 顯示全部樓層
這BASF 更厲害, 當年 1960年代錄過一次, 到現在2013年, 外觀及tape 本體都很好, 拿來再次錄音, 完全沒有老態
</a><img src="http://i1132.photobucket.com/albums/m567/zangou/BASFtapegoodappearance.jpg" width="200"length="200" alt=" photo BASFtapegoodappearance.jpg"/></a>

121

主題

1904

回帖

50

積分

新手上路

四星級會員

舊站積分
4282
舊站發表文章數
1320
 樓主| 發表於 2013-3-11 14:14:13 | 顯示全部樓層

Re: Re: Re: Re: Re: 我的轉錄實驗

posaune兄

你盡量慢慢的試沒關西
壞的丟了,全部算德哥的
看你壞多少盒德哥就寄給你多少盒
但是你要教我們怎用,這是重點

如何才不會ㄐㄐ叫


德哥這裡還有10多箱,沒關西



原發表者是 posaune
[B]


用Google找了一些資料,
我的R2R依照對應的帶子可調bias/EQ/level
找到對應406應調的參數,
而這組407跟406帶子特性非常相近,
似乎只差在塗層厚薄。

於是,剛剛又錄了一捲,
一開始效果出奇的好,大約過了十五分鐘後,
出現雜音...
中斷錄音,開始清潔磁頭與壓帶輪,
都是磁粉成塊沾黏[|)]
清好再繼續錄,聲音又正常了。

心得:不管是錄或放,棉花棒與磁頭清潔劑隨侍在側,好聲來自手勤[8D] [/B]
只愛玩,好看好聽的 receiver 電源一開音樂就來 FB----台灣JBL討論區 偶是住基隆愛騎單車的德哥

121

主題

1904

回帖

50

積分

新手上路

四星級會員

舊站積分
4282
舊站發表文章數
1320
 樓主| 發表於 2013-3-11 14:19:22 | 顯示全部樓層
原發表者是 Danzen
[B]
這裡有提到 Ampex vintage tape 的毛病
Early older ampex tapes are usually OK, so long as it is polyester based (and was made before about 1977). But 80s, and early 90s vintage tape is highly suspect. 456/456, 406/407, 499, at the very least, are almost always horribly sticky, and will often freeze even the strongest tranports within less than a minute of playing
http://www.audiokarma.org/forums/showthread.php?t=110050 [/B]


Danzen兄


因為德哥比較看不懂
他上面有沒有提到剛於帶子較緊,較黏,的處理方法
或是會ㄐㄐ叫的處理方式
只愛玩,好看好聽的 receiver 電源一開音樂就來 FB----台灣JBL討論區 偶是住基隆愛騎單車的德哥

2

主題

178

回帖

0

積分

新手上路

二星級會員

舊站積分
271
舊站發表文章數
168
發表於 2013-3-11 14:50:51 | 顯示全部樓層
原發表者是 sfgx880
[B]

Danzen兄


因為德哥比較看不懂
他上面有沒有提到剛於帶子較緊,較黏,的處理方法
或是會ㄐㄐ叫的處理方式 [/B]

死馬當活馬醫吧, 之前忘了在那裡看過, 這些都是受潮才黏著, 要不要用吹風機吹一吹試試 , 失敗我可不負責歐, GiGi叫的問題和偏壓有很大的關係, 樓上我有貼過相關 web site, 看看您機器的service manual 應該有說明, 這需要信號產生器和示波器及預錄各頻率的帶子來調整, 找師父吧, 高級的casset deck 就有bias adjust 鈕, R2R 各廠牌 bias 好像不一致,  service manual 應該也有說明,  空白帶上不一定有標示, 我的原版預錄帶如果是用 ampex, 盒上有說要用 ampex 相容的 bias.

2

主題

178

回帖

0

積分

新手上路

二星級會員

舊站積分
271
舊站發表文章數
168
發表於 2013-3-11 15:20:11 | 顯示全部樓層
德哥您前幾樓有說迴帶時不經過磁頭及壓帶輪, 這樣帶子容易被張力拉長, 以後速度會不正確, 速度是由壓帶輪決定的.

26

主題

350

回帖

0

積分

新手上路

二星級會員

舊站積分
33
舊站發表文章數
150
發表於 2013-3-11 15:34:31 | 顯示全部樓層

Re: Re: Re: Re: Re: Re: 我的轉錄實驗

德哥

目前試錄的方式就是:
確保帶子經過的地方是乾淨的,
因為些微的髒污就會把磁粉刮下來,
堆積在各組件上,尤其是第一個磁頭,
造成GiGi雜音來源。

手邊還有兩三種其他廠牌庫存帶,
也有比這批老的,會再試試。

另外,也找到兩三種英美進口的磁頭清潔噴劑,
都試用過後,會上來分享使用情形。

原發表者是 sfgx880
[B]posaune兄

你盡量慢慢的試沒關西
壞的丟了,全部算德哥的
看你壞多少盒德哥就寄給你多少盒
但是你要教我們怎用,這是重點

如何才不會ㄐㄐ叫


德哥這裡還有10多箱,沒關西



[/B]
PREAMP: Megatech 226 POWER: Megatech SE-845 CDP: Philips CD104 LP: PIONEER PL/LINN LP12/LENCO L75 PHONO: Megatech T1/DENON DL-103 R2R: AMPEX ATR-700 SPEAKER: Tannoy Arden (HPD385)
您需要登錄後才可以回帖 登錄 | 立即註冊

本版積分規則

Archiver|MyAV視聽商情網 test

GMT+8, 2026-11-18 15:17 , Processed in 0.110040 second(s), 41 queries .

Powered by MyAV!

快速回覆 返回頂部 返回列表