忘記密碼
 立即註冊
查看: 313078|回覆: 723

DAT 討論區

[複製鏈接]

262

主題

3928

回帖

100

積分

新手上路

四星級會員

舊站積分
4581
舊站發表文章數
2498
發表於 2005-3-29 17:13:24 | 顯示全部樓層 |閱讀模式
有鑑於這幾次在板上出售DAT
經一些網友反應對DAT這種東西完全不瞭解
因而有感建立一篇討論區
請vegasruf兄,numatics兄,rachelwu兄多多在此板上討論
提供一些心得供有意踏入DAT世界的朋友參考

35

主題

1298

回帖

200

積分

新手上路

二星級會員

舊站積分
3307
舊站發表文章數
209
發表於 2005-3-29 17:30:07 | 顯示全部樓層

dat機器

請教板上各位前輩,dat機器都在何處購買?[:O] [:O]

100

主題

1萬

回帖

0

積分

新手上路

五星級會員

舊站積分
446
舊站發表文章數
7575
發表於 2005-3-29 17:50:01 | 顯示全部樓層
6X5兄那應該還有一些,不妨寫悄悄去問他或親自去一趟他那[]
[url=][color=black].[/color][/url]

71

主題

741

回帖

0

積分

新手上路

快意人生

舊站積分
4
舊站發表文章數
494
發表於 2005-3-29 19:01:28 | 顯示全部樓層

Re: DAT 討論區

原發表者是 alen
[B]有鑑於這幾次在板上出售DAT
經一些網友反應對DAT這種東西完全不瞭解
因而有感建立一篇討論區
請vegasruf兄,numatics兄,rachelwu兄多多在此板上討論
提供一些心得供有意踏入DAT世界的朋友參考 [/B]


Alen兄

            不敢當,弟只是因為工作關係接觸.因為真的是聲音相當好,所以也希望有興趣的朋友多多參考.您太抬舉了...小弟的家用音響器材根本算是個笨蛋,還請Alen兄與其他網兄多多指導.謝謝!

除上面您所列的網兄外..Mr.朱兄也使用780.....其實還有很多網兄使用DAT....還有請其他網兄分享經驗喔.....[]
請網兄前輩多多指導 [img]http://www.jesiisma.com/i/control_luces.jpg[/img]

71

主題

741

回帖

0

積分

新手上路

快意人生

舊站積分
4
舊站發表文章數
494
發表於 2005-3-29 19:04:22 | 顯示全部樓層

Re: dat機器

原發表者是 pinkk
[B]請教板上各位前輩,dat機器都在何處購買?[:O] [:O] [/B]


如果台灣有代理商是最好.如果沒有國外也可以囉

小弟個人買過sv-3700.sv-4200,PCM-2700A.PCM-2600.FOSTEX D10.D-60.TASCAM DA30MKII.DA-60
請網兄前輩多多指導 [img]http://www.jesiisma.com/i/control_luces.jpg[/img]

71

主題

741

回帖

0

積分

新手上路

快意人生

舊站積分
4
舊站發表文章數
494
發表於 2005-3-29 19:10:59 | 顯示全部樓層
來響應一下Alan兄..po上一篇國外的介紹DAT文章

DAT RECORDERS !
The DAT (Digital Audio Tape) recorder is a great format to work in. It delivers CD-quality sound (or better) in a small, tape-based format. And, since DAT has become a mastering and audio backup standard, it's easy to exchange tapes with other studios and musicians.

The older-style analog tape recorders degrade the audio they record. They add tape hiss, tape distortion, frequency response errors, and speed variations (wow and flutter). Digital recorders get rid of these problems. Thanks to digital recording, the original goal of tape recording has finally been achieved: to accurately store and reproduce our audio creations.

In this booklet we'll give a brief overview of digital recording, DAT recorders, DAT tape, and digital editing.


--------------------------------------------------------------------------------

DIGITAL RECORDING
Like an analog tape recorder, a digital recorder (such as a DAT machine) records audio on magnetic tape, but in a different way. Here's what happens.

The signal from your mixer is run through a lowpass filter (anti- aliasing filter) which removes all frequencies above 20 kHz.
Next, the filtered signal passes through an analog-to-digital (A/D) converter. This converter measures the voltage of the audio waveform several thousand times a second.
Each time the waveform is measured, a binary number (made of 1's and 0's) is generated that represents the voltage of the waveform at the instant it is measured. Each 1 and 0 is called a bit, which stands for binary digit.
These binary numbers are stored magnetically on tape in the form of a modulated square wave recorded at maximum level.
The playback process is the reverse:

The binary numbers are read from tape.
The digital-to-analog (D/A) converter translates the numbers back into an analog signal made of voltage steps.
An anti-imaging filter (lowpass filter) smooths the steps in the analog signal, resulting in the original analog signal.
Since the digital playback head reads only two binary numbers, it is insensitive to tape hiss and tape distortion. Numbers are read into a buffer memory and read out at a constant rate, eliminating speed variations.

The resulting freedom from noise, distortion, print- through, wow, and flutter makes digital recordings sound extremely clean and clear. Unlike analog recordings, digital recordings can be copied with little or no degradation in quality. Lost data is restored by error-correction circuitry.

QUANTIZATION
As we said, the audio signal is measured several thousand times a second to generate a string of binary numbers. The longer each binary number is (the more bits it has), the greater the accuracy of the measurement. In other words, short binary numbers provide poor resolution of the waveform's amplitude or voltage; long binary numbers provide good resolution. A quantization of 16 bits is considered to be adequate for high-fidelity reproduction. It is the current standard for digital tape recording and compact discs.

SAMPLING RATE
The rate at which the waveform is measured is called the sampling rate, measured in samples/sec. At a sampling rate of 48 kHz, 48,000 measurements are generated for each second of sound.

The higher the sampling rate, the wider the frequency response of the recording. The upper frequency limit is slightly less than half the sampling rate. If the sampling rate is 44.1 kHz, this is adequate for high-fidelity reproduction up to 20 kHz.


--------------------------------------------------------------------------------

DAT RECORDERS
Currently, open-reel digital recorders are quite expensive. For stereo mastering, there's an alternative to an open-reel digital recorder: a DAT or R-DAT (Rotating-head Digital Audio Tape) Recorder. Costing $700 and up, a DAT recorder records audio digitally on a small cassette. Its sound quality is at least as good as a compact disc. What you put in, you get out, virtually without any added hiss, distortion, or wow & flutter.

The DAT transport is very fast. A two-hour tape winds in about 45 seconds. The DAT machine records on a small cassette about half the size of a standard analog cassette. The shell has a hinged door that flips open to expose the tape.

When you load the cassette, two spindles enter the two hubs from below the cassette and lock it into place. Then the tape is drawn into the machine and wraps around a rotating drum, which holds the record and playback heads.

As the tape moves past the rotating heads, they scan diagonally across the tape as they write the digital signal. The tracks laid down by the rotating heads are about one-tenth the thickness of a human hair! Although the linear tape speed is slow, the tape speed as seen by the record head is very high, so the ultrasonic digital signal can be recorded. Tape drop-outs can cause data losses, but most of these are restored by a circuit that corrects the errors.

While the audio program is recorded, absolute time is written on tape. It's the running time in hours, minutes, and seconds, where 00:00:00 is at the head of the tape. You use it to locate selections and time them.


--------------------------------------------------------------------------------

DAT TAPE
As we said, a DAT cassette is about half the size of a standard analog cassette, measuring 73 x 54 x 10.5 mm. Its tape is 3.81 millimeters (1/8") wide. On one end of the shell is a hinged door that flips open to expose the tape so it can be drawn around the rotating head drum.

DAT tapes can record up to two hours of audio on a tape about 60 meters long. They come in various lengths. Blank tapes use a metal-powder oxide, while prerecorded tapes use a barium-ferrite oxide. The cassette includes a sliding safety tab on one end to prevent accidental erasure. If the little door is closed, you can record on the tape. If it's open, you can't.

Computer-grade DAT tapes are more reliable than audio-grade DAT tapes. They were originally designed for computer backup systems but make an excellent audio recording tape. They use a different formulation, run cleaner are easier on your heads and are certified error free.

SUBCODES
Subcodes are information written on tape, independent of the audio signal, that tells the machine the number of each selection or program, where each selection starts, and whether or not to play each one. You can record or erase subcodes without affecting the audio program. The three main types of subcodes are Program Numbers, Start IDs, and Skip IDs.

* Program Numbers are assigned to selections in order, and can then be used to locate them.

* A Start ID marks the beginning of each selection. It can be written manually or automatically. Manual Start IDs can be placed anywhere, say, to mark cues. Automatic Start IDs are put on tape whenever there is enough signal applied, after a silence of three or more seconds. You'll want to record manual Start IDs after recording all your mixes onto a DAT tape.

Like other subcodes, Start IDs can be recorded or erased without altering the audio program. You can enter them during recording or playback. If the cassette's safety tab is set to prevent accidental erasure, you can't record or erase subcodes. Most DAT machines can automatically re-number the Start IDs in consecutive order.

*A Skip ID makes the machine skip the selection. This ID can only be written manually. Whenever the machine senses a Skip ID during playback, it stops and fast winds to the next Start ID, and begins playing. This function can be turned on and off.
請網兄前輩多多指導 [img]http://www.jesiisma.com/i/control_luces.jpg[/img]

71

主題

741

回帖

0

積分

新手上路

快意人生

舊站積分
4
舊站發表文章數
494
發表於 2005-3-29 19:11:46 | 顯示全部樓層
DAT FEATURES

A DAT has conventional cassette transport controls, plus a number of unique features, indicators, and controls. Some DAT machines include these features:

* Search: When you enable the search function, the machine fast winds to the selected program number.

* Memory Rewind or Return to Zero: When enabled, this function rewinds the tape to a preset "0" position on the tape counter. * SMPTE time code: This is available on a few models, digitally encoded as part of the subcode. It's used to synchronize the DAT audio program with a video tape or a MIDI sequencer.

* Mic inputs: These let you plug two mics directly into the DAT recorder. Generally the sound quality of the DAT mic preamps is not as good as an external mixer or mic preamp. You have a choice of pro-type balanced XLR connectors or consumer-type unbalanced phone jacks.

* Digital inputs and outputs: These let you make digital copies with no A/D-D/A conversion required. A copy made from a digital in/out is a clone of the original recording, with no loss in sound quality. There are several types of connectors available: AES/EBU or SDIF-2: Pro type with 3-pin XLR connectors. IEC 958 or SPDIF: Consumer type with RCA phono jacks. Optical (EIAJ CP-340): Pro or consumer; highest quality data transfer.

* Confidence head playback: Some units have an extra head so you can hear the tape playback as you're recording.

Other features might include a built-in monitor speaker, a time- clock/calendar, phantom power for condenser microphones, input attenuator to prevent overload, and a stereo microphone. Some DAT recorders are very small and portable, and they run off batteries as well as AC.


--------------------------------------------------------------------------------

DAT INDICATORS
The DAT recorder has an LED or LCD display window which shows various aspects of the recording.

* Time: Absolute time, remaining time on the tape, or elapsed time for the current selection.

* Meters: Peak-reading bargraph meters that show recording level. Unlike with an analog tape deck, "0" on the meter is absolute maximum recording level.

*Error: If this indicator flashes, there was a loss of data. Usually the electronics can correct for this loss. Some units show the error rate. * Sampling rate: The frequency at which the machine is sampling audio signals, such as 44.1 kHz. This indicator works both during recording and playback.

* Subcodes: Program number, Start ID, and Skip ID.

* Search mode: This shows whether the search mode is activated. CONTROLS

* Sampling Frequency: This is the rate at which the DAT's A-to-D convertor samples or measures the analog waveform during recording. On most models you can switch between 48 kHz and 44.1 kHz. Some units can also record at 32 kHz.

A rate of 44.1 kHz is preferred if your tapes will be duplicated on compact disc, because no sample-rate conversion is needed. 48 kHz gives slightly better sound quality. The mastering engineer can avoid sampling- rate conversion by using the DAT's analog outputs. A 32 kHz sampling rate provides either longer playing time or four channels.

During playback, a DAT recorder senses the sampling rate and automatically switches to the correct rate.

* Analog/digital input selector: This chooses between analog or digital input signals.

* Emphasis: Used in older consumer DAT recorders, this boosts high frequencies during recording and turns them down during playback. The result is lower noise. If a DAT tape was recorded with emphasis, the DAT machine detects it during playback and switches in de-emphasis automatically.

* Copy protect: This puts a code on tape that prevents the tape from being digitally copied. A DAT deck will identify data that has been recorded with a copy-inhibit flag in its subcode, and will not digitally copy that recording. Be sure copy inhibit is OFF if you want to duplicate your DAT master digitally!

Consumer DAT machines have a copy inhibit system called SCMS (Serial Copy Management System). This feature lets you make a digital-to-digital copy, but prevents regenerations from that copy. That is, you can't make digital copies of the copy.

--------------------------------------------------------------------------------

EDITING DAT TAPES
You can't edit DAT tape by splicing it because the tracks won't align perfectly after the splice, and you may remove some data. Instead, you can copy from one DAT machine to another, changing the order of selections during the copying process. Tight edits are impossible unless you use a digital-audio editing system. It includes a circuit card you plug into your home computer, an input/output box, and editing software. To use it, you play your DAT tape, record it on hard disk, use a mouse and computer screen to edit the selections, and record a new edited DAT tape off the hard disk. When you edit the program, you remove noises and count-offs just before and after each song, and add several seconds of silence between songs. You can even do crossfades and fadeouts.

Editing systems cost about $1500 and up, not including the hard disk. You need about 11 megabytes per minute of stereo program. A 660 megabyte hard drive will record about an hour.
請網兄前輩多多指導 [img]http://www.jesiisma.com/i/control_luces.jpg[/img]

151

主題

1549

回帖

0

積分

新手上路

三星級會員

舊站積分
166
舊站發表文章數
829
發表於 2005-3-29 19:55:39 | 顯示全部樓層

DAT

給vergasruf兄拍拍手....[]  


謝謝介紹DAT文章.........[]

155

主題

3688

回帖

100

積分

新手上路

BBC家族粉絲

舊站積分
486
舊站發表文章數
3037
發表於 2005-3-29 21:21:54 | 顯示全部樓層
原發表者是 vegasruf
[B]DAT FEATURES

A DAT has conventional cassette transport controls, plus a number of unique features, indicators, and controls. Some DAT machines include these features:

* Search: When you enable the search function, the machine fast winds to the selected program number.

* Memory Rewind or Return to Zero: When enabled, this function rewinds the tape to a preset "0" position on the tape counter. * SMPTE time code: This is available on a few models, digitally encoded as part of the subcode. It's used to synchronize the DAT audio program with a video tape or a MIDI sequencer.

* Mic inputs: These let you plug two mics directly into the DAT recorder. Generally the sound quality of the DAT mic preamps is not as good as an external mixer or mic preamp. You have a choice of pro-type balanced XLR connectors or consumer-type unbalanced phone jacks.

* Digital inputs and outputs: These let you make digital copies with no A/D-D/A conversion required. A copy made from a digital in/out is a clone of the original recording, with no loss in sound quality. There are several types of connectors available: AES/EBU or SDIF-2: Pro type with 3-pin XLR connectors. IEC 958 or SPDIF: Consumer type with RCA phono jacks. Optical (EIAJ CP-340): Pro or consumer; highest quality data transfer.

* Confidence head playback: Some units have an extra head so you can hear the tape playback as you're recording.

Other features might include a built-in monitor speaker, a time- clock/calendar, phantom power for condenser microphones, input attenuator to prevent overload, and a stereo microphone. Some DAT recorders are very small and portable, and they run off batteries as well as AC.


--------------------------------------------------------------------------------

DAT INDICATORS
The DAT recorder has an LED or LCD display window which shows various aspects of the recording.

* Time: Absolute time, remaining time on the tape, or elapsed time for the current selection.

* Meters: Peak-reading bargraph meters that show recording level. Unlike with an analog tape deck, "0" on the meter is absolute maximum recording level.

*Error: If this indicator flashes, there was a loss of data. Usually the electronics can correct for this loss. Some units show the error rate. * Sampling rate: The frequency at which the machine is sampling audio signals, such as 44.1 kHz. This indicator works both during recording and playback.

* Subcodes: Program number, Start ID, and Skip ID.

* Search mode: This shows whether the search mode is activated. CONTROLS

* Sampling Frequency: This is the rate at which the DAT's A-to-D convertor samples or measures the analog waveform during recording. On most models you can switch between 48 kHz and 44.1 kHz. Some units can also record at 32 kHz.

A rate of 44.1 kHz is preferred if your tapes will be duplicated on compact disc, because no sample-rate conversion is needed. 48 kHz gives slightly better sound quality. The mastering engineer can avoid sampling- rate conversion by using the DAT's analog outputs. A 32 kHz sampling rate provides either longer playing time or four channels.

During playback, a DAT recorder senses the sampling rate and automatically switches to the correct rate.

* Analog/digital input selector: This chooses between analog or digital input signals.

* Emphasis: Used in older consumer DAT recorders, this boosts high frequencies during recording and turns them down during playback. The result is lower noise. If a DAT tape was recorded with emphasis, the DAT machine detects it during playback and switches in de-emphasis automatically.

* Copy protect: This puts a code on tape that prevents the tape from being digitally copied. A DAT deck will identify data that has been recorded with a copy-inhibit flag in its subcode, and will not digitally copy that recording. Be sure copy inhibit is OFF if you want to duplicate your DAT master digitally!

Consumer DAT machines have a copy inhibit system called SCMS (Serial Copy Management System). This feature lets you make a digital-to-digital copy, but prevents regenerations from that copy. That is, you can't make digital copies of the copy.

--------------------------------------------------------------------------------

EDITING DAT TAPES
You can't edit DAT tape by splicing it because the tracks won't align perfectly after the splice, and you may remove some data. Instead, you can copy from one DAT machine to another, changing the order of selections during the copying process. Tight edits are impossible unless you use a digital-audio editing system. It includes a circuit card you plug into your home computer, an input/output box, and editing software. To use it, you play your DAT tape, record it on hard disk, use a mouse and computer screen to edit the selections, and record a new edited DAT tape off the hard disk. When you edit the program, you remove noises and count-offs just before and after each song, and add several seconds of silence between songs. You can even do crossfades and fadeouts.

Editing systems cost about $1500 and up, not including the hard disk. You need about 11 megabytes per minute of stereo program. A 660 megabyte hard drive will record about an hour. [/B]



吳兄是專家,
也是錄音技術方面
的資深高手..
問他準沒錯!..

[]
Pre承唐300B, NAD 116, NAD 2700, NAD3020i, Tien TT3, Viroa 12", FR 64s, Lyra Delos. Ortofon SPU Royal GM MKIIx2, 夢幻版LS3/5A Luxury Version, B&W DM1200, Wharfedale Super Diamond

1427

主題

1萬

回帖

200

積分

新手上路

四星級會員

舊站積分
32767
舊站發表文章數
1887
發表於 2005-3-29 22:40:10 | 顯示全部樓層

被點名了

小弟是被一位前輩提醒使用DAT之後還不信邪的換了2台CD訊源的鐵齒者,
後來被6X5兄點醒把DAT拿來當DA的受惠者.....

玩了這麼多年,.經過這兩位前輩才發現原來好聲離我那麼近[8D] []
您需要登錄後才可以回帖 登錄 | 立即註冊

本版積分規則

Archiver|MyAV視聽商情網 test

GMT+8, 2026-11-18 16:19 , Processed in 0.103492 second(s), 43 queries .

Powered by MyAV!

快速回覆 返回頂部 返回列表