新手上路
五星級會員
- 舊站積分
- 557
- 舊站發表文章數
- 11806
|
M3F
THX certified monitors for film and TV dubbing theatres

Various Amplifier Packages.
Digital Input Options with Digital Crossover Network.
Custom cabinet designs for existing soffits.
Custom cabinet finishes.
The tall, narrow format of the cabinet means that the 3 (or 5) front channels can be easily and correctly positioned behind relatively small screens.
Cabinet construction is of 22mm MDF. The high frequency driver uses a shallow horn to give increased sensitivity, it also effectively 『time aligns』 the driver to the mids giving good response both on and off axis. Approved for use in small to medium THX Dubbing Theatres.
The M3F dubbing loudspeaker systems has been designed to meet the demand for THX approved high quality monitoring in small to medium film and television dubbing theatres where listening distance typically is 5-6 meters. The tall narrow format of the cabinet ensures that up to five channels can be easily and correctly positioned at the front of any room or behind a relatively narrow screen. Each cabinet contains two 12" bass drivers, two 6" mid range and a special horn loaded tweeter for additional sensitivity. The design incorporates perfect mechanical and electrical time alignment between the tweeter and the midrange units ensuring excellent off-axis response. The system is usually specified with a digital crossover system enabling perfect equalisation and correction. It is normally supplied as a two way active system with an integrated high efficiency passive network between mid and high.
The M3FX is a higher power version of the M3F using 4x 12" bass drivers and Neodymium magnet mid drivers. This version is not yet THX approved.
Model M3F
Cabinet -
Size 1300(H) x 520(W) x 400(D) mm
Drivers 2x Dynaudio 30W100XL Bass (12")
2x Dynaudio 17W75XL Mid (6")
1x Dynaudio D260H High (1")
Connectors 4mm Binding Posts as standard (Options Available)
Crossover -
The system is normally specified with a digital crossover system such that screen equalisation etc. can be easily achieved. The system is normally run 2-way active (250Hz) with a high efficiency passive network between mid and high (4kHz) -
Amplification -
Amplifiers of 500W-750W/ch-4 would normally be specified -
Performance -
Frequency response 35Hz - 20kHz (+/-3dB, Room dependent)
Typical peak SPL 123dB @ 2m, 2 cabinets driven
T.H.D. less than 1% at 90dB
Options -
Various Amplifier Packages. Digital Input Options with Digital Crossover Network. Custom cabinet designs for existing soffits. Custom cabinet finishes -
|
|