新手上路
二星級會員
- 舊站積分
- 644
- 舊站發表文章數
- 120
|
發表於 2010-9-29 15:16:58
|
顯示全部樓層
Procedures to fix the issue
Hello,
If the problem is HDD initial fail(the Power red LED keep flash after plug power cable), then try the procedures below to fix the problem.
1. open the top cover.
2. disconnect the long HDD cable.( this is because of changed to external mounted HDD)
3. use the original HDD cable, the short one, to connect to HDD.
please double check the direction of HDD cable on PCB plug !
4. put the HDD in the original rack.
5. plug the power and try again.
Hope this will help to slove your problem. |
|