When using an offset antenna one must realize that the shape of the feed horn is a very important aspect of the dish design. The efficiency of the dish can be severely compromised if the feed horn section of the LNBF is not matched to the dish. This is especially true of the oval dishes because of their shape and the fact that the F/D ratio of the dish is different horizontally than it is vertically.
The feed horn must be optimized for the F/D ratio of the dish otherwise it either won't fully illuminate the entire dish or will "see" around the edges of the dish and pickup terrestrial interference. With an oval dish like the F/D ratio is different in one plane than it is in the other. Therefore you need a feed horn designed the same way.
Otherwise you'll either only see a smaller circular portion of the dish or you'll pickup background noise from around the edges of the dish on its minor axis. The actual performance of such dishes can differ considerably. Those who try to use improperly designed feed horns or LNBF』s are probably only illuminating a small portion of the dish and the result is they get the performance of a smaller dish as the F/D ratio of most LNBFs is closer to that of the minor axis of these dishes