新手上路
二星級會員
- 舊站積分
- 758
- 舊站發表文章數
- 458
|
喜歡Pink Floyd 音樂是音為那迷人的電吉他音色,
很好奇這據稱只是"simple circuit",卻可送出這麼有魅力的聲音,
如果這"simple circuit"用在ㄧ般喇叭,會有相同的"功力"嗎?
(不考慮distortion 音效)
David Gilmore 的傢俬:
amp(同款但型號不確定)

First and second tubes are channel preamps, 12AY7 is specified. 6072A may also be used. A low-noise, low-microphony 5751, 12AX7 or 7025 is also usable, though they will have more voltage gain and will change the sound of the amp considerably.
Third tube is the driver. 12AY7 is specified. 6072A may also be used. A 5751, 12AX7 or 7025 is also usable, though they will have more voltage gain and will change the sound of the amp considerably.
Fourth tube is a 12AX7. This is the phase inverter tube. This tube need not be low-noise or low-hum, nor does it need to be tested for microphony. It must have good quality heater insulation. 12AX7s or 7025s are suitable. Good NOS 12AT7s may also be used here. We understand that some technicians recommend Ei or Preferred Series 7025 for this duty.
Power tubes are a pair of 6L6. Recommend using matched pair of 6L6GCs or NOS 6L6Gs, GAs, GBs, or WGB, or 5881s. Current TAD 6L6WGC-STR and re-issue Tung-Sol 5881 are the best option in place of NOS tubes. Also acceptable are NOS JAN-Philips 6L6WGB, and NOS types 7581A, KT66 or 350B. NOS metal 6L6s run too hot. DO NOT use other types.
Rectifier tubes are a PAIR of 5U4. Any 5U4 type is acceptable. 5R4 types may be used in an emergency. DO NOT use 5AR4, GZ34, 5V4 or 5Y3. Inexpensive Russian 5U4Gs are readily available and suitable. |
|