忘記密碼
 立即註冊
查看: 5498|回覆: 5

重低音 駐波處理 之低頻陷阱設計原則

[複製鏈接]

39

主題

515

回帖

200

積分

新手上路

二星級會員

舊站積分
35
舊站發表文章數
122
發表於 2015-10-8 21:39:15 | 顯示全部樓層 |閱讀模式
小弟查資料無意間看到,分享給需要的網友,但英文的,得花點時間看看。小弟沒技術不然還真想diy玩玩

原址http://www.customaudiodesigns.co ... ign-principles.html

Acoustic membranes, wood or plasterboard sheet can be very effective at the absorption of low frequency sound especially in small spaces where studwalls can often be built from them. These walls will act as bass absorbers and so should be taken into account when constructing a studio of this type. Any sheet material will resonate at a particular frequency depending on the relationship between the mass of the material and the distance it is spaced from a solid wall surface. This resonant frequency can be calculated by dividing 60 by the square root of the panel mass (in Kg/m²) multiplied by the distance from the wall in metres.
Bass Trap Basic Design Principles
Simply put, the heavier the panel and/or the deeper the air space behind, the lower the resonant frequency of absorption will be. If mineral wool is included in the cavity space behind then the frequency band over which the absorber will work will be widened.
i.e. our 5kg soundproofing mat securely fixed over a frame of the following depths will absorb as follows:-
120Hz @ 50mm
98Hz @ 75mm
84Hz @ 100mm
60Hz @ 200mm
Fig1. shows how plywood sheet performs when used in this manner. If the plywood were substituted for soundproofing mat or plasterboard, which has a greater mass, the absorption frequency would be much lower.

For example 12.5mm plasterboard on 75mm studwork will resonate at around 63Hz. Two sheets of 12.5mm plasterboard will resonate at around 50Hz also over a 75mm cavity.
        Bass Trap Basic Design Principles
Obviously the problem with rooms built from studwork is that as a large amount of surface area is taken up with effectively a 'uniform depth bass absorber' which will have substantial bass absorption but only in a particular frequency range. This may or may not be convenient to you. In a masonary walled room the bass reflections will be that much stronger and you will almost certainly be in the need for a large amount of low frequncy absorption areas if you want a clean sound.

Fig2 shows a simple single depth absorber. It is essential that the mineral wool behind the panel does NOT touch the front panel itself otherwise the panels vibrations will be damped down.
        Bass Trap Basic Design Principles
Bass frequencies tend to collect in the corners of a room so in a small room where space is at a premium it's best to build or place Bass Traps in the wall/ceiling soffits. This also makes the maximum use of the extra depth available and because an angled panel, across a corner, has a varying cavity depth the frequencies that are absorbed will be even wider than those of a constant depth absorber.

Fig3 shows a simple corner mounted panel absorber. It is essential that the mineral wool behind the panel does NOT touch the front panel itself otherwise the panels vibrations will be damped down.

Most of our acoustic absorption and diffusion products will absorb substantially more low frequency sound if they are mounted away from the walls, or across the corners, of a room.
        Bass Trap Basic Design Principles
Probably the most efficient bass absorber is the quarter wavelengh trap. This is a large absorbent cavity which has a depth relative to the frequency in question. The outer face and the inner damping act togeather in a pumping type effect which makes the traps extremely efficient especially at the lowest frequencies whos wavelengths are extremely large.

Fig4 shows a simple quarter wavelength bass trap.

Most of our acoustic absorption and diffusion products will absorb substantially more low frequency sound if they are mounted away from the walls, or across the corners, of a room.
        Bass Trap Basic Design Principles
©Custom Audio Designs

249

主題

3萬

回帖

220

積分

新手上路

上將

舊站積分
11603
舊站發表文章數
26283
發表於 2015-10-9 08:44:23 | 顯示全部樓層
看有沒有人要做出來賣,在下覺得比較快 .....這牽涉到工藝水平[]。
[url=http://www.myav.com.tw/market/showthread.php?s=&threadid=5991]進口超值--色差、同軸數位、S線[/url] [url=http://www.myav.com.tw/market/showthread.php?s=&threadid=127614]綜合商品區[/url] [url=http://www.myav.com.tw/market/showthread.php?s=&threadid=20459395]In-akustik 德國敏力線[/url]

39

主題

515

回帖

200

積分

新手上路

二星級會員

舊站積分
35
舊站發表文章數
122
 樓主| 發表於 2015-10-9 09:14:51 | 顯示全部樓層
的確,希望有高手玩看看,然後出來賣,造福下廣大的樂迷,我想要的6個 ,有品牌的 要價3萬多囧rz 。

不過,有個疑問,這樣處理 與 用EQ處理,效果相差多少呢?

148

主題

3757

回帖

240

積分

新手上路

五星級會員

舊站積分
4615
舊站發表文章數
3354
發表於 2015-10-9 11:27:38 | 顯示全部樓層
沒理解錯誤的話,這是屬於共振吸音體,吸音頻寬窄,

通常是依照空間模式或對照頻譜上發現問題的頻率去設計吸音體的中心頻率。

計算和實作的頻率誤差問題要考量到,另外是吸音係數通常不(特別)高...

您說的廠製品應該有提供幾個不同中心頻率的產品供消費者選擇吧?
音樂性是用音響性釀的酒;電影的現場不在電影院,音樂的現場不在音樂廳

39

主題

515

回帖

200

積分

新手上路

二星級會員

舊站積分
35
舊站發表文章數
122
 樓主| 發表於 2015-10-9 11:49:21 | 顯示全部樓層
ASHINN大,
沒錯,我想要的可以選中心頻率,這樣避免其他段過度吸收

我想要的那個, 網頁說一個適當擺設可減1-2 db

249

主題

3萬

回帖

220

積分

新手上路

上將

舊站積分
11603
舊站發表文章數
26283
發表於 2015-10-9 14:05:01 | 顯示全部樓層
在下也來貼一個,有興趣試看看!







[url=http://www.myav.com.tw/market/showthread.php?s=&threadid=5991]進口超值--色差、同軸數位、S線[/url] [url=http://www.myav.com.tw/market/showthread.php?s=&threadid=127614]綜合商品區[/url] [url=http://www.myav.com.tw/market/showthread.php?s=&threadid=20459395]In-akustik 德國敏力線[/url]
您需要登錄後才可以回帖 登錄 | 立即註冊

本版積分規則

Archiver|MyAV視聽商情網 test

GMT+8, 2026-11-18 19:36 , Processed in 0.155744 second(s), 35 queries .

Powered by MyAV!

快速回覆 返回頂部 返回列表