忘記密碼
 立即註冊
查看: 1076|回覆: 0

沒想到外國人也很在意lcd與dlp之爭

  [複製鏈接]

316

主題

1682

回帖

100

積分

新手上路

三星級會員

舊站積分
34
舊站發表文章數
678
 樓主| 發表於 2001-2-23 19:52:10 | 顯示全部樓層

沒想到外國人也很在意lcd與dlp之爭

看看吧!!我懶得翻譯,ccc

LCD vs. DLP: Which is the best?

Evan Powell, ProjectorCentral, February 21, 20001
http://www.projectorcentral.com

You don't have to shop around the projector market very long before discovering that "LCD" and "DLP" somehow refers to two different kinds of projectors. You might not even know what LCD and DLP are before asking the obvious question 「which one is better?」 Since this is one of the most common questions we get, we thought we'd offer an answer for everyone.

The answer is simple. Sort of. LCD and DLP each have unique advantages over the other, and neither one is perfect. So it is important to understand what each one gives you. Then you can make a better decision about which will be better for you.

(Note: there is a third light engine technology called LCOS (liquid crystal on silicon) that is being developed by several vendors, most notably JVC. While JVC has manufactured some excellent products with this technology, the discussion of LCOS is beyond the scope of this article.)

The Technical Differences between LCD and DLP

LCD (liquid crystal display) projectors usually contain three separate LCD glass panels, one each for red, green, and blue components of the image signal being fed into the projector. As light passes through the LCD panels, individual pixels (「picture elements」) can be opened to allow light to pass or closed to block the light. This activity modulates the light and produces the image that is projected onto the screen.

DLP (「Digital Light Processing」) is a proprietary technology developed by Texas Instruments. It works quite differently than LCD. Instead of having glass panels through which light is passed, the DLP chip is a reflective surface consisting of thousands of tiny mirrors. Each mirror represents a single pixel.

In a DLP projector light from the projector』s lamp is directed onto the surface of the DLP chip. The mirrors move back and forth, directing light either into the lens path to turn the pixel on, or away from the lens path to turn it off.

In very expensive DLP projectors, there are three separate DLP chips, one each for red, green, and blue. However, in all of the DLP projectors under $20,000, there is only one chip. In order to define color, there is a color wheel that consists of red, green, blue, and sometimes white filters. This wheel spins between the lamp and the DLP chip and alternates the color of the light hitting the chip from red to green to blue. The mirrors turn on and off based upon how much of each color is required for each pixel at any given moment in time. This activity modulates the light and produces the image that is projected onto the screen.

The Benefits of LCD Technology

The primary benefit of LCD is that it controls red, green, and blue independently through three separate LCD panels. That means you can adjust brightness and contrast of each color channel individually. In LCD projectors with good controls on board, this enables you to achieve excellent color fidelity. In a single-chip DLP projector, color is fixed and defined by the physical color wheel and the color temperature of the lamp which changes over its usable life. What you see is what you get, and it cannot be altered. Unfortunately, sometimes what you get is not very good.

LCD also delivers a sharper image than DLP at any given resolution. The difference here is more relevant in data than in video. This is not to say that DLP is fuzzy. When you look at a financial spreadsheet projected by a DLP projector it looks clear enough. It』s just that when a DLP is placed side-by-side with an LCD, the LCD typically looks razor sharp in comparison.

A third benefit of LCD is that it is more light-efficient. LCD projectors produce significantly higher ANSI lumen outputs than do DLPs with the same wattage lamp. At this writing there are no single-chip DLP projectors rated 2000 ANSI lumens or brighter. All of the portable light cannons in the 15 lb weight class putting out 3000 ANSI lumens are LCD projectors.

The Benefits of DLP Technology

There are several unique benefits that are derived from DLP technology. One of the most obvious is package size. Since the DLP light engine consists of a single chip rather than three LCD panels, DLP projectors tend to be more compact. All of the current 3-pound miniprojectors on the market are DLPs. Most LCD projectors are six pounds and up, with the lightest and smallest one (at this writing) being the NEC LT155 at 4.9 pounds.

Historically, DLP has been well-received in the home theater world primarily due to two video quality advantages—better contrast and the lack of pixelation. Earlier generations of LCD projectors were notorious for their inability to generate solid blacks and to resolve subtle shadow details. Blacks on LCDs looked gray and shadows appeared muddy and indistinct. In comparison, DLP projectors did a much better job.

DLP projectors still tend to outperform LCDs in this regard. However the large performance gap in black levels and contrast that used to exist between LCD and DLP has closed noticeably in the past year, so the competitive edge that DLP has in contrast and black levels is not as great as it once was.

Reduced pixelation is another benefit of DLP. LCDs were always known for their highly visible pixel structure, often referred to as the screendoor effect because it appears as though the picture is being viewed through a screendoor. LCD technology had a hard time being taken seriously among many home theater enthusiasts (quite understandably) because of this major flaw in the image.

DLP technology went a long way toward eliminating the screendoor effect. In SVGA (800x600) resolution, DLP projectors have either a muted pixel structure or an invisible pixel structure depending upon the size of the projected image (the larger the image the more visible the pixels). Conversely, SVGA-resolution LCD projectors uniformly have a clearly visible pixel grid at just about any screen image size. For this reason, we never recommend SVGA-resolution LCD projectors for home theater use except for those on the most limited of budgets.

Two developments have recently served to close the gap between DLP and LCD in the area of pixel visibility. First was the step up to XGA resolution (1,024x768). This higher resolution uses 64% more pixels to paint the image on the screen. The inter-pixel gaps are reduced in XGA resolution, so pixels are more dense and less visible. In XGA resolution, DLP projectors have an invisible pixel grid on any typical home theater screen no matter how big. LCD projectors with standard XGA panels have a still visible, but much reduced screendoor effect.

The second recent development in LCDs was the use of Micro-Lens Array (MLA) to boost the efficiency of light transmission through XGA-resolution LCD panels. Some XGA-class LCD projectors have this feature, but most do not. For those that do, MLA has the happy side effect of further reducing pixel visibility. On some projectors with this feature, the pixel grid can be rendered entirely invisible by placing the focus just a slight hair off perfect, a practice recommended for the display of quality video. This makes the pixels indistinct without compromising video image sharpness. With some MLA-enhanced LCD projectors there is no longer any practical difference in pixel visibility between them and DLP.

The Current State of the Art

The largest developers and manufacturers of LCD are Sony and Epson. These companies were not about to stand by and let Texas Instrument sweep the digital projector market with its competing DLP technology. So competition has driven both the LCD makers and Texas Instruments to improve their respective products in the ongoing battle for market share.

LCD technology has made notable improvements in contrast and reducing the visibility of pixels in video. LCD projector makers have continued to build on latent advantages in color display.

On the other hand, DLP color wheels have improved of late, and color accuracy on some of the newer models is not as poor as it used to be. DLP has maintained an edge, although a shrinking one, in contrast performance.

Both LCD and DLP are evolving rapidly to the benefit of the consumer. The race for miniaturization has produced smaller yet more powerful projectors than we might have even imagined possible just a year or two ago. Light output per pound has increased dramatically. And video quality on the best LCD and DLP projectors now surpasses that available in a commercial movie theater.

ProjectorCentral continues to recommend both LCD and DLP projectors for a variety of applications. For mobile presentation it is hard to beat the current group of 3-pound DLPs on the market. For conference rooms that require higher light output and greater connectivity, LCDs hold a commanding lead.

When it comes to home theater, there is a continuing myth that DLP is the way to go based on the decisive competitive edge that DLP used to have over LCD. However those days are past. Some of the best price/performing video projectors on the market today are LCDs. But the simple fact is that, depending upon the budget range of the buyer, both DLP and LCD have strong offerings for home theater.

If you are buying for your own home theater, you will be well-served by becoming familiar with some of the latest in LCD offerings as well as DLP before making a final purchase decision. And if you are a home theater dealer interested in delivering to your customers the best performance for the money, we suggest investing some time to evaluate the new high-performance LCD products from companies such as NEC and Sanyo. Do this before committing to one of the traditional 「high-end home theater」 brands that these days are too often delivering more style than substance for their ultra-premium price tags.



您需要登錄後才可以回帖 登錄 | 立即註冊

本版積分規則

Archiver|MyAV視聽商情網 test

GMT+8, 2026-11-18 20:19 , Processed in 0.089947 second(s), 23 queries .

Powered by MyAV!

快速回覆 返回頂部 返回列表