新手上路
五星級會員
- 舊站積分
- 557
- 舊站發表文章數
- 11806
|
樓主 |
發表於 2001-5-19 12:30:22
|
顯示全部樓層
貼一篇影像大師Joe Kane的
[h2] Home Cinema
The Screen Does Make A Difference [/h2]
A commentary by Joe Kane
As of this writing we are two years into Stewart's Studiotek 130 screen material which has revolutionized the quality of the large screen video imaging market. Extensive product testing has proven the validity of the design concepts. Implementation of this new material has significantly improved projection video image quality. Screens play a bigger role in images than most of us realize.
Until the beginning of this decade, video projectors occupied a "niche" in the corporate and industrial market. The primary goal to present a large video image was far less important than obtaining the highest possible light output from the screen. Emphasis shifted towards image quality in the early 1990's with the coming of Home Cinema. Audio quality could already rival that of most neighborhood movie houses. Similar expectations were being placed on the video, within the limits of available software.
As a display standards consultant, I was brought in at the beginning of this emphasis shift in an attempt to make it happen faster. My first efforts centered on making projectors conform to accepted industry display standards. That was, and is, such a full time task that it took me nearly a year to understand the role being played by the screen in image quality. One problem with high gain video screens is "hot spotting". This image artifact comes from focusing the light in a particular direction. From any viewing angle there will appear to be an area of the screen that is brighter than any other. The position of the hot spot will depend on your viewing angle. It will change as you move around the screen. A high gain video screen increases the difficulty of obtaining a high quality video image. Reducing the screen gain, from the popular flat screen values of 2.0 and 1.5 diminishes the amount of light falloff as you move around the screen. But that isn't the only change needed to improve picture quality. Ideally, screen gain should be at unity, but some projectors still require help from the screen in obtaining a usable amount of light. Screens with gain factor above one will have some degree of hot spotting.
What I realized is that attention is being drawn to the hot spot, primarily because of the color shift as you move around the screen and not the light intensity difference.
Screen reflectivity of red, green, and blue light on most high gain screens is not equal, green being the highest, followed by red and blue. Your attention is drawn to hot spotting primarily because of the color shift you see as you move around the screen, not the luminance or light level shift.
In June of 1992, Stewart Filmscreen was asked to supply front-screen material meeting my lower gain and flat spectral response specifications for a Home Cinema demonstration sponsored by Snell Acoustics at the Summer CES in Chicago. The screen they provided showed a dramatic difference in quality, much more than would have been expected in dropping the gain from 1.5 to 1.3. Later named Studiotek for its reference role in imaging, this new screen material was also a first in a new environmentally friendly manufacturing process. The rest, as they say, is history.
About Joe Kane
Joseph Kane Jr. is the leading consultant in the video industry for electronic display standards. He is a frequent contributor to key consumer electronics magazines including "The Perfect Vision" and "Audio Video Interiors," and established the Imaging Science Foundation, which helps set and maintain standards for high-quality electronic image equipment for commercial and consumer markets. Mr. Kane's continuing goal is to further educate the consumer market regarding display quality.
網址:http://www.stewartfilm.com/home_ ... home_theater_9.html
--------------------

SLEEPLESS IN SEATTLE
--------------------
被 SleeplessInSeattle on 05/19/2001 12:30:46
被 SleeplessInSeattle on 05/19/2001 12:31:43 |
|