新手上路
- 舊站積分
- 295
- 舊站發表文章數
- 562
|
發表於 2009-3-26 00:52:03
|
顯示全部樓層
http://vip.asus.com/forum/view.aspx?id=20080423032545000&board_id=21&model=Xonar+D2X&page=1&SLanguage=en-us
參考官方說法試試
I was looking through the forum due to my own problems (the popping/beeping noises due to the DTS/DD signal being incorrectly handled through the SPDIF) when I noticed alot of people wonder how come when they set the "Digital Output" device as default, there isn't any DTS/DD signal.
To correctly set it, you need to set your "Speakers" as the default device in the "Sound" control panel (which can be found in Control Panel, or right click your Volume icon in the tray bar and select " lay Back Devices").
Then you open the "Xonar Audio Center" tray icon by clicking it, and setting the input to any of the multi-channel input (depending on how many sound channels is produced from what you are doing [gaming, movies, etc.]). And set the SPDIF OUT on to DTS or DD.
If you want to know why you set Speakers to default to get sound out your Digital Output Device (SPDIF), or why you need to select how many channels the source has instead of the software doing it for you, continue reading.
Why do I need to set Speakers as default output instead of Digital Output Device?
The explanation: Although the ASUS XONAR runs on a proprietary ASUS sound processor, this SPU was actually co-developed with CMEDIA (and seems to bare a close resemblance to the CMEDIA CMI8788), as well the software is based on XEAR3D (as you can see when you click the "About" button in the XONAR Tray Icon).
And the technique to convert the regular analog output to digital output was designed under the same architecture to solve a big problem: Windows SUCK.
Windows only encodes/understands 2 channel output through the SPDIF, so when Windows is in control, sound can only be in stereo. What Windows can do is to give an application exclusive control over the sound card and allow SPDIF passthrough for DTS/DD sound. But when you give exclusive control of the sound card and allow SPIDF passthrough, you no longer have control over volume, post-processing, and etc. because the sound is directly passed through from the device to the sound card. And at this time, only the application in control can produce sound, so there is no sound from Windows, MSN, or anything else for that matter, since only the device has EXCLUSIVE CONTROL over the SOUND DEVICE.
i.e. When playing DVD with DD/DTS using SPDIF passthrough for 5.1+ channels, and your friend messages you on MSN, you don't hear it, because the DVD has exclusive control of your sound card. Also, you won't be able to change the volume.
So how does the sound card output SPDIF above 2 channels?
The solution from CMEDIA was to first output as ANALOG PCM, then convert through software/hardware to the SPDIF. This way all sound is output as 5.1+ analog channels (which Windows CAN do), and then convert it to SPDIF.
i.e. Sound Source -> 6 channel Analog Output -> Convert to SPDIF -> SPDIF Out
But in order to do this, as I said before, the sound needs to be output as 6 channel Analog Output first. If you set the "Digital Output Device" as the default device, this is what Windows sees:
Sound Source -> 2 Channel SPDIF Out
So it can only produce 2 channels.
In order to convert multi-channel audio to SPDIF, you need to set Analog Output Device aka "Speakers" as the default device. Then you need to configure it to 5.1 or 7.1 channel (whatever you have setup) under the "Sound" control panel.
After doing so, what Windows sees is that you have 5.1/7.1 channel output to Analog, and starts sending sounds to those channels.
Windows:
Sound Source -> 6 Channel Speaker Out
But what happens is that the software catches the 6 Channel Speaker Out, converts it into DTS/DD, then outputs the SPDIF.
XONAR Software/Hardware:
Sound Source -> 6 Channel Speaker Out -> convert to DTS/DD -> output SPDIF
---
Why do I have to choose how many channels is my source?
The explanation: As I said before, the sound is output to the Analog Output channels, then caught by software/hardware and converted to DTS/DD and output to the SPDIF, right?
So imagine windows plays something and outputs to the 6 channels:
1 sound
2 sound
3
4
5
6
and the software/hardware captures the 6 channels. How many channels are there? Are there 6 channels, or 2 channels? It could be there are 6 channels, but only first 2 channels has sound. Or it could also be the input only has 2 chanel sound?
Or what if you play music (2 channel) and a video (6 channel) [let's say news, cause sometimes people watch news and listen to music at the same time].
The software can't tell how many channels there are unless you tell it.
What is the benefit to setting to 2 channel?
You can upmix to multichannel (DTS:NEO, DD Pro Logic II, etc.). Upmixing means converting 2 channel to multichannel sound.
However, if your source is 6 channel, and you try to upmix it, it screws up the sound and is no longer accurate because the software is looking at only the first 2 channels and ignoring the other 4. So you need to set it to 6 channel. (That's why DSP such as DTS:NEO, DD Pro Logic II, etc. are not available when set to 6 or 8 channel sound outputs). |
|