I remembered that you had a COMPAQ MP-2800, I bought it also today regarding to your post before. I enjoy it! More dark detail than LCD projector. But I still have no idea to set the parameter for brightness, contrast, color, tint, sharpness, etc. Would you please provide you setting for me? By the way, after I read the user guide, MP-2800 seems supported component video input with a VGA to component cable. Do you have it? Is that same as VGA to RGBHV cable in D-Sub type? Your response is very appreciate!
I had setted my projector Mp2800 as below:
Bright:58
contrast:50-52.(depend your screen and background)
Color:50
Tint:52
The Mp2800 support the component inpunt with 1080i and 720p(in the user guide with last page index and HDTV chapter). The cable just use the Pin 1,2,3 and 6,7,8. These cables should include in the package. Yes, you could use the VGA to RGBHV in D-sub type to connect it. The 480p is not support,since the USA HDTV use more high frequency then 480P. I hope this setting could help you. If you had the AVIO dvd or Essential DVD,you should try to adjust the parameter by using the DVD test patten. SInce your environment and DVD machine are not the same as me. Enjoy the big movie.
Pretty thanks for your kindly and instantly response in this thread, that's really helpful to setup my MP-2800.
There are more questions I have since I used my MP-2800.
Q1. Do you use somehthing like Proton truescan progressive generator to improve the motion quality? After I briefly evaluation, the motion quality seems not very well, it looks like some kind of fresh rate, I gusee it's an interlace issue. But I read you reply about the MP-2800 doesn't support 480p signal, do you have any idea on it?
Q2. I expect to make a VGA to component video cable by myself. Could you please provide more detailed information for pin assignment in PIN 1,2,3,6,7,8?
Sorry for bother you again, one more question, do you install your MP-2800 on the roof? I mean that do you have a holder or something like that to locate it on the roof. I want to do this, but I see nothing about the screw hole for location pupose?
Q2. I expect to make a VGA to component video cable by myself. Could you please provide more detailed information for pin assignment in PIN 1,2,3,6,7,8?
1. I don't have the true-scan to connect to the Mp2800. Since the Mp2800 is not support the 480P. I'd prefer the QuadSCan, since it could generate to 1080i scaler.
2. The movie title with little fresh image, in my opinion, the titles(such as GIga's Daughetr with the Tree moving section) it savle or interleave will have such problems. The BS with 1080i also has such problems sometime.
3. I am just prepare to draw the wall-mount kit for the MP2800. Since I am busy for these days and next week I will be in Shang-Hay, so I will miss the Audio Show in this year shuch I prepare to find some screen to fit my house.
Hope you enjoy it.
Thanks for response. So far, I still not able to recognize what's the difference both Y,Pb,Pr and Y,Cb,Cr? Would you please explaint it for me?
Hi! Tim,
I'm pretty afraid if I put my MP-2800 on the ground, because I have a kid around 1 year old. Some day in the furture, maybe he will kick or lick my MP-2800...[]
You mentioned that you will find some new projection screen out to fit you house. May I know what's your current screen you have? Size?
I use the wall mount Steward 16:9 90" screen.
Since my wife didn't allow me to break the decoration of my living room. Now I am survey the power driver screen to fit my house. I think 100" will be O.K. for me.