忘記密碼
 立即註冊
查看: 537|回覆: 14

3:3 PULL-DOWN, and 1:1 MAPPING

  [複製鏈接]

37

主題

1940

回帖

0

積分

新手上路

Digital = Simplicity

舊站積分
30
舊站發表文章數
1976
發表於 2003-11-1 16:06:18 | 顯示全部樓層 |閱讀模式
Gentlemen,

Bought my engineering unit of Momitsu V-880 for five (5) long months, during four (4) times of firmware upgrading, finally with the newest firmware Version 102203, my V-880 really pleases me now by enabling CUSTOM RESOLUTION SETTINGS menu.

Hooking up Z1 and V-880 with a 10 meter DVI-I cable to V-880 and a DVI-I/VGA adapter to Z1. My setting goal is to achieve 3:3 PULL-DOWN and 1:1 MAPPING at 540p (960x540, the native pixel array of Z1).

Since the NTSC DVD editted for V/F 59.94Hz 3:2 PULL-DOWN, I calculated like that:

    59.94 / (3 + 2) = 11.988 frame generated by DVD per second

    11.988 x 6 = 71.928 (V/F for 3:3 PULL-DOWN)

    71.928 x 563 (Vertical Synch. Total) = 40.495 KHz (H/F)

Using PowerStrip Settings for 540p, I set the 9-7-1-3 CUSTOM RESOLUTION SETTINGS menu as follows,

H/F                  40495                   V/F                   7193
VideoWidth       0960                   VideoHeight      0540
HSyncTotal        1104                   PreHSync          0016
HSyncActive       0032                   PostHSync        0096
VSyncTotal        0563                    PreVSync          0002
VSyncActive       0006                   PostVSync         0015
HSyncPolarity    0000                   VSyncPolarity     0000

Regarding Z1 settings: PC mode (VGA): Wide Thru

Fine Synch:      6
Total         :     1112
Horizontal :     140
Vertical      :     24

The overall picture quality were improved dramatically, as,

1. Most of shimmers on dark area, mosquito noises on bright area, horizontal scaling strip noises, vertical synch strip noises,....
are reduced 75% at least (just my feeling with my eyes only).

2. Colour saturation is much more vivid than ever.

3. C/R improvement, I can't figure out why, maybe caused by S/N improvement.

These are just my primary observation, I'll do a test with AVIA dvd to verify. But I'm damned sure I got my simplified HTPC, my baby.  "All shall Love me and Despare." -- Queen of Elves, LOTR

Now my restless heart can rest for awhile (until MicroSoft WMV9's launching out sometime next year 1st Qt, I'll stick to my Z1 and V-880), I'v got a reason to resist the temptation from AE500, Z2, HS20, H56, PE6800,.......

Regards, Peter

By the way, please may somebody more knowledgeable share us your V-880 custom resolution settings parameters and regarding Z1 settings.

Strongly recommend some of my fellow members who aready have V-880 but don't have a DVI-D display or the current v-880's DVI setted formats don't fully work well with your display, the CUSTOM RESOLUTION SETTINGS is a MUST try function.
BLACK @Level 16, WHITE @Level 235

74

主題

883

回帖

0

積分

新手上路

三星級會員

舊站積分
160
舊站發表文章數
851
發表於 2003-11-4 15:20:02 | 顯示全部樓層
Hi Peter Caesar:

我現在也更新到最新的韌體了,我中午稍微試了一下,因為我的投影機是
1024x576,目前我只試了它說明書中的三種1024x576
也就是720p50   H:37.50   V:50.00
         720P59   H:44.96   V:59.94
         720P60   H:45.00   V:50.00
        還有調整長寬為1024  576
        目前只看到螢幕變寬變大,投影機顯示仍為525P(和之前480P輸入一樣)
      
是否還應該調整哪些數值,調多少?
謝謝

37

主題

1940

回帖

0

積分

新手上路

Digital = Simplicity

舊站積分
30
舊站發表文章數
1976
 樓主| 發表於 2003-11-4 17:22:47 | 顯示全部樓層
原發表者是 TUFU
[B]Hi Peter Caesar:

我現在也更新到最新的韌體了,我中午稍微試了一下,因為我的投影機是
1024x576,目前我只試了它說明書中的三種1024x576
也就是720p50   H:37.50   V:50.00
         720P59   H:44.96   V:59.94
         720P60   H:45.00   V:50.00
        還有調整長寬為1024  576
        目前只看到螢幕變寬變大,投影機顯示仍為525P(和之前480P輸入一樣)
      
是否還應該調整哪些數值,調多少?
謝謝 [/B]


Dear TUFU,

I'm no expert on 576p settings for D1208, however I'm very sure that some of parameters on v-880 CUSTOM SETTINGS for 576p as follows:

Video Width: 1024
Video Height: 0576
Vertical Frequency: 5000 (50Hz) for 2-2 pulldown PAL
                               7500 (75Hz) for 3-3 pulldown PAL
                               5994 (60Hz) for 3-2 pulldown NTSC
                               7193 (72Hz) for 3-3 pulldown NTSC

Following equations for your ref.

HorSyncTtl = VidWidth + PrHorSyn + PstHorSyn + HorSynActivate
VtvSyn Ttl = VidHeight + PrVtSyn + PstVtSyn + VSynActivate
Horzontal Frequency = Vertical Frequency x Vertical Sync Total

Sorry for being not able to offer some more info. What I do to my custom settings (960x540/1:1 mapping/3:3 pulldown) is based on Power Strip's settings for 960x540. I guess the Power Strip's settings for 1024x576 may worth a try with your D1208 & V-880 combination, at least VGA input should work.

Good luck, Peter
BLACK @Level 16, WHITE @Level 235

74

主題

883

回帖

0

積分

新手上路

三星級會員

舊站積分
160
舊站發表文章數
851
發表於 2003-11-4 18:34:21 | 顯示全部樓層
謝了Peter  Caesar
晚上再試試看

15

主題

64

回帖

0

積分

新手上路

初級會員

舊站積分
0
舊站發表文章數
47
發表於 2003-11-4 20:17:33 | 顯示全部樓層
請問一下?如果投影機是800x600的那最佳的設定是如何??
800x600投影機(dt200)的16:9模式是800x450,有沒有辦法
把dvd v880調成800x450的??
謝謝!!

15

主題

64

回帖

0

積分

新手上路

初級會員

舊站積分
0
舊站發表文章數
47
發表於 2003-11-4 21:24:05 | 顯示全部樓層
對了!!請問一下什麼是3:3 PULL-DOWN,和2:3 PULL-DOWN有何差別??
效果有較好嗎??

37

主題

1940

回帖

0

積分

新手上路

Digital = Simplicity

舊站積分
30
舊站發表文章數
1976
 樓主| 發表於 2003-11-4 22:50:50 | 顯示全部樓層

1024x576 settings through VGA connection

TUFU,

I had tried the 1024x576 custom settings through VGA las follows:

H/F...........................45000.........V/F..........................7500 (3:3 for PAL DVD), or
H/F...........................43157.........V/F..........................7193 (3:3 for NTSC DVD)

VideoWidth...........1024.........VideoHeight...........0576
HSyncTotal............1312.........PreHSync...............0016
HSyncActive...........0096.........PostHSync.............0176
VSyncTotal.............0600.........PreVSync...............0002
VSyncActive............0007.........PostVSync.............0016
HSyncPolarity.........0000.........VSyncPolarity.........0000

After tweaking with Vertical Size/Position and Horizontal Size/Position on my 32" CRT monitor, both PAL 3:3 settings and NTSC 3:3 settings work fine with the monitor through its VGA input.
And I'll try these settings with Z1 later.

I have no idea that will the DVI/576p settings be accepted by D1208, as DVI spec is relatively new, and DVI's compatibility and supporting are poorer than VGA. However, there exist a big chance that D1208 do accept DVI/576p, since it's a native 1024x576 DLP. Just for ref.

Regards, Peter

37

主題

1940

回帖

0

積分

新手上路

Digital = Simplicity

舊站積分
30
舊站發表文章數
1976
 樓主| 發表於 2003-11-4 23:10:23 | 顯示全部樓層
原發表者是 acaac
[B]請問一下?如果投影機是800x600的那最佳的設定是如何??
800x600投影機(dt200)的16:9模式是800x450,有沒有辦法
把dvd v880調成800x450的??
謝謝!! [/B]


Dear acaac,

There are several modes internally set on V-880, the L300U WODE600 is supposed to be the 800x600 resolution which might be the one optimised for native 800x600 projectors; try the mode, and then try all of the TV types (16:9, 4:3 Letter Box, or 4:3 Pan Scan) under INITIAL SETTING menu to find out which type you like the most (most likely 4:3 Letter Box).

Good luck, Peter
BLACK @Level 16, WHITE @Level 235

37

主題

1940

回帖

0

積分

新手上路

Digital = Simplicity

舊站積分
30
舊站發表文章數
1976
 樓主| 發表於 2003-11-4 23:17:47 | 顯示全部樓層
原發表者是 acaac
[B]對了!!請問一下什麼是3:3 PULL-DOWN,和2:3 PULL-DOWN有何差別??
效果有較好嗎?? [/B]


Dear acaac,

It's a long story, do a search for 2:3 pulldown. After that, you'll certainly understand all about the 2:2, 2:3, 3:3,..... pulldown's, they are similar to each other theoretically.

Good luck. Peter

74

主題

883

回帖

0

積分

新手上路

三星級會員

舊站積分
160
舊站發表文章數
851
發表於 2003-11-5 08:41:24 | 顯示全部樓層
Hi Peter Caesar:
昨天晚上試了三組數值,包含兩組你提到的,投影機都可以正確顯示是
1024x576 60 但是在開機畫面的比較,在1024x576和480P比較看起來較soft
沒有那麼銳利,感覺有一點失焦,初步看起來並沒有比較好,還沒有用影片或是測試片
真正比較,因為用開機畫面最容易一下比較480P,720P,1080I,CUSTOM的差別
我想可能的原因一是調整的數值還不太對或是二V880因為都是數位輸出到D1208
而V880本身SCALE沒有D1208來的好(就像之前封網友所說的)
如果真的沒有比較好,我可能要試著在我的AE100用VGA輸入調成1:1 MAPPING再看看
DVI-A下的情形
您需要登錄後才可以回帖 登錄 | 立即註冊

本版積分規則

Archiver|MyAV視聽商情網 test

GMT+8, 2026-11-23 04:41 , Processed in 0.090574 second(s), 43 queries .

Powered by MyAV!

快速回覆 返回頂部 返回列表